Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Grips

ESI Ribbed Chunky Grips
$20.99
Love the size of Chunky but desire extraordinary? Ribbed has 8 distinct ribs that optimize shock absorption and grip! - 60 Grams - Standard Grip Length – 5 1/8? - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included *Install Bar Plugs first for the protection of grips and ease of installation *Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
Sunlite Ergo Form Locking
$21.59
- Dual-compound TPR construction with dual-alloy lock-on clamps - Ergonomic Grip shape for extended comfort - Length: 130mm
Black Ops Tactile Silicone Non-Flanged Grips
$21.99 - $24.99
- Hand-conforming silicone formula provides grip and shock absorption - Silicone construction won't dull, harden, or fade over time - 128mm length - End plugs included
Cannondale TrailShroom Grips
$22.00
Get a grip. A straight profile, lock-on grip that combines a ribbed, mushroom pattern on the palm side for comfort, and hex-pattern on the underside for grip. Where it thrives: Challenging trails, out in the elements What it's built for: Control, grip Highlights: - Mushroom ribs for comfort and control - Micro-Hex pattern for all-weather grip - Single lock-on clamp for security
Sunlite Ergo Form Plus Locking
$22.00
- Dual-compound TPR construction with dual-alloy lock-on clamps - Ergonomic Grip shape for extended comfort - Length: 140mm - Style: w/ Bar Ends
ESI Extra Chunky Grips
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
SRAM Locking Grips (For Grip Shift)
$23.00 - $25.00
• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.
RaceFace Half Nelson Lock-On Grips
$23.99 - $26.99
Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps
Crank Brothers Cobalt Grips
$24.99
Crank Brothers' Cobalt Grips are the go-to choice for XC rides long and short. These supportive, high-density foam grips offer a solid grip and superb bar feel. They utilize dual locking clamps to ensure the grips don't twist while you're riding.
Crank Brothers Iodine Grips
$24.99
Crank Brothers' Iodine Grips have what you need for all-mountain riding. Their Kraton rubber construction and tacky logo pattern offer a solid grip and superb bar feel. And, to prevent twisting, they utilize dual locking clamps.
Supacaz Kush Ergo
$25.00
This ergonomically designed grip fuses comfort, performance, and style all into one. The ergonomically designed wing is plush for not only your hands but also your wrists and upper body. This is the ideal grip for Marathons or Stage Racing. - Material: Dual-density high-performance rubber - Star Ringz: 100% aluminum - Anodized/powder coated - Laser-etched
Origin8 Microtac Ergo Locking Grips
$25.49
- Single clamp, dual density TPE ergonomic lock on grips - Microtac surface texture is composed of multiple small molded cylinders that improve grip and reduce vibration - Ergonomic shape helps relieve pressure on the hands that can lead to pain and/or numbness - 132mm length with variable 30-35mm diameter grip area - 135g per pair
WTB Comfort Zone Clamp-On
$25.95
WTB's Comfort Zone Clamp-Ons feature an ergonomic shape with a soft rubber. This design gives you more surface area to hold, absorbs shocks and vibrations, and prevents hot spots in your palms.
ODI Vans Lock-On MTB Grip
$26.95 - $39.99
Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench
Ritchey Truegrip X Locking Grip
$27.95
Ritchey Truegrip X Locking mountain bike grips are comfortable and lighter-weight dual-density grips that lock to the handlebar.
ODI Elite Pro Grips
$28.95
The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm
Sunlite Ergo Plus Locking
$29.79
- Ergonomic grips with detachable alloy bar ends - Designed to provide great comfort and support for all day riding - Bar end provides lock-on feature - Length: 135mm
Ergon GA3 Single Twist-Shift
$29.95
The GA3 Single Twist-Shift is designed for 1x twist shift set-ups like SRAM XX1 and Pinion. The fully integrated, rubber enclosed lock-on clamp (collar) on the outside of the grip provides plenty of space for a wide grip stance. This concept combines the relief benefits and wrist support of an ergonomic wing grip with the freedom of movement of rounder style grips. With DNA from our popular GA2, the GA3 offers optimized shapes and advanced surface textures to reduce gripping forces. The super soft, UV-stable rubber compound is exclusively manufactured for Ergon in Germany and allows greater grip, delivering more control on demanding terrain. Rubber covered outer clamps offer an even wider grip position for generous space. The end plug is replaceable. Compatible with carbon handlebars.
Ergon GA3 Small
$29.95 - $34.95
More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!
Ergon GC1
$29.95
The GC1 was developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The GC1 is made from 100% German, TÜV-certified rubber compounds of the purest quality. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
Ergon GP1
$29.95 - $39.95
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum
ODI Rogue Lock MTB Grips
$29.95 - $35.40
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Troy Lee Designs Lock-On MTB Grip
$29.95 - $35.00
- Grooved channels prevent mud and water buildup - Overmolded flap gives added protection on outside clamp - Unique undercut pads provide slim comfortable feel with maximum grip - Custom flanged design provides hand support with more usable grip surface
Oury Lock-On Bonus Pack
$29.99 - $34.99
The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included - Flange: No - Lock On: Yes - Grip Shift Specific: No - Length: 120mm - Shape: Round - Weight: 84g
Redshift Sports Cruise Control Drop Bar Grips
$29.99
Tired of numb, painful hands? The Cruise Control Drop Bar Grip System gives you the ultimate in control and comfort on your road or gravel bike. Instead of riding all day holding a round metal tube, you'll have multiple ergonomic positions designed to eliminate the high pressure zones that have you shaking your hands out every mile. Together, the Top Grip and Drop Grip offer a complete ergonomic upgrade that fits almost any drop bar on the market. So go ahead, take the long way home. Combine with the Kitchen Sink Handlebar and Really Long Bar Tape to take things to the next level. Benefits: - Ergonomic pad shaping eliminates hot spots which can lead to hand pain, numbness and tingling - Kraton rubber filters road buzz - Multiple grip options let you customize your handlebar for the perfect fit Details: - Top Grips attach to the bar underneath the tape to provide a larger, ergonomic hand position on the tops of your bars. - Drop Grips go over the end of the bar, giving you a comfortable drop position with quick access to the brake levers. Compatibility: - Compatible with standard drop bar handlebars - Top Grips are installed directly on the bar, before bar tape is applied, so you may need a fresh roll of tape. Did we mention our Really Long Bar Tape works great, especially for wider bars?
Lizard Skins Lock-On Charger Evo
$31.99 - $33.99
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)
Lizard Skins Lock-On Logo Grips
$31.99
Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Lock-on grips include the grips, clamps, screws, and plugs. - Length: 130 mm - Weight (with plugs): 120 grams - Diameter: 31.5 mm
ESI Fit CR Grips
$32.92
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. CR stands for Chunky, Racer’s Mix. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ODI Dread Lock Grips
$32.95
The Tinker Juarez Signature Dread Lock Grips offer the padding and control needed for longer rides. Designed for comfort at every turn, the Dread Lock Grips feature ODI's exclusive ultra-soft and lightweight A.I.R.E. compound along with an offset design that provides additional padding for your hands without the feel of a bulky grip. Soft TPE ends provide extra support when railing turns and help to protect your grips from impacts while the V2.1 Single-Clamp Lock-On system ensures that your grips stay put no matter what the conditions. - Offset Grip design provides more padding on the palm side of grip - Contoured surface for improved comfort on longer rides - Soft TPE Ends offer improved comfort and grip protection - Ergonomic finger cutouts provide improved grip in all conditions - Dread Lock textured surface provides improved control with less effort
Lizard Skins Lock-On Northshore Grips
$33.99
The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 125 grams - Diameter: 33 mm