Filter By:
Bells/Noise Makers
$24.95
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you.
The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars).
- Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar.
- Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
$24.95
The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes.
- Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
- We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.
$12.99
•Handlebar mount
•Fits most bikes
•Alloy ringer style bell
•53mm
$17.99
•Great novelty Horn / Bell combination
•Combination of Ringer bell and Squeeze horn
•Fits most handlebars
$14.99
Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.
$12.99
Let everyone know your coming with Sunlite's Gel Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.
$34.29
- 120db electronic rechargeable bicycle horn with remote
- USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses
- Charging indicator light shows red when charging, and green when fully charged
- IP65 water and dust proof
- Compatible with 22.2 - 31.8mm handlebars
- Whistle, horn, and alarm sounds
$19.99
Sunlite's Time Clock Mini Bell produces a clean, crisp sound from it's 40mm brass bell housing with stainless steel lever and CNC machined base. It's compatible with both 22.2mm and 25.4mm bars using included shims
- Function: Mallet
- Material: Brass
- Color: Brass
- Handlebar Mount: 22.2/25.4mm
$32.00
A new bell built to Spurcycle standards using 30% fewer parts and a singletrack focus. Lighter and more compact, it's the perfect bell for your mountain bike or flat-bar commuter.
- Fixed 22.2mm or 31.8mm composite nylon mount uses half the normal mount width to easily fit between components on your handlebar
$49.00 - $69.00
Spurcycle bells create powerful, enduring sound. Give notice well in advance with a loud, convincing tone. Precision built in the USA for a lifetime of way clearing.
Material: brass Dome, anodized aluminum Hammer, stainless steel Mount
Finish: Raw or Black DLC
Dome size: ?30mm x 20.5mm
Weight: 45g
Origin*: Made in USA, Guaranteed for Life
Install: 2.5mm hex tool required. Recommend 1Nm torque.
$25.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate.
- ?Polished brass bell
- Replaces a 10mm 1 1/8" headset spacer
- Quick-reflex alloy clapper
- Lifetime PDWarranty
$25.00
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear.
- Solid brass bell
- Brass striker
- Alloy mounting
- Fits 22.2 - 25.4mm handlebars
$10.00
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear.
- Weight: 26g (.9oz)
- Dome Diameter: 34mm (1.34")
- Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
$15.00
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$15.00
Mirrycle's Incredibell Brass Duet Colors makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Its compact size lets you mount it just about anywhere on your handlebars. And, the bell's vibrant colors add a splash of personality to any bike.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$10.00
Mirrycle's Candibell is more than just a fun, compact bell, it’s the loudest Incredibell of all.
- Dome Diameter: 48mm (1.9")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$13.00
The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too!
- Dome Diameter: 48mm (1.9")
- Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters
$13.00
Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
$11.00
Add some flair and fun to kids' bikes with MSW Squeeze Horns.
- Fits standard 22-26mm diameter handlebars
- Approximately 3" wide
$24.99
Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell.
- Compact, classic bell-shape construction for a high-quality sound
- Bell and striker are made from high-polished brass
- CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube
- Molded rubber shims add grip and fine tune fitting
- Stainless steel hammer
- Impressively loud ring
- Weight: 34g
$39.95
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars.
- Fits 23.8 – 31.8mm handlebars
- Weight: 46.5g
$39.95 - $39.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars.
- Fits 22.2mm handlebars
- Weight: 31.5g
$14.99
Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring.
- Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters
- Dome Diameter: 44mm (1.6")
$12.00
A new angle on bells. Low and lean looking; very techy too.
- Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
$15.99
Let people know you're coming through. And do it in style.
The perfect way to say 'Hello'
Or 'hey there', 'coming through' and 'sup'.
We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors.
Product details:
- Cheerful 'ding-dong' doorbell style ring
- Fits standard bicycle handlebar
- Includes attachment hardware
$15.99
The best thing to happen to handlebars since grips.
- Easy to push lever creates friendly ringing sound
- Fits standard bicycle handlebar
- Includes attachment hardware
$9.99
Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!
$34.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available.
- Mounts with steel strap and features lever strike operation
- Fits bars 22.2mm to 31.8mm
- Made in Japan
Page 1 of 2
Next page