Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
$439.95
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.
- Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts
- Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles)
- Includes two facing cutters:
IS Mounts
Post and Flat Mounts
- Includes storage case
$273.19
The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor.
NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.
$266.99
- The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets.
- The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore.
- The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm sizes and include a tool roll for organized shop use and travel.
$193.86 - $246.43
Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility.
- Freely pivoting ratchet head with 5 predefined locking positions
- Fine toothing with 72 teeth
- Small return angle of only 5 degrees
- Free-turning sleeve for high working speeds
- Take-it-easy tool finder: color coding by size
$229.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
$214.00
Campagnolo UT-CN400 Chain Tool.
- Used to install 12-speed and 13-speed Campagnolo chains
$199.95
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools.
The SK-4 includes:
- AWS-10 Fold-Up Hex Wrench Set
- BBB-4 Big Blue Book of Bicycle Repair
- CC-3.2 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CT-5 Mini ChainBrute Chain Tool
- FR-5.2 Cassette Lockring Tool
- GSC-1 GearClean Brush
- HCW-16.3 Chain Whip/Pedal Wrench
- HR-8 8mm Hex Wrench
- MLP-1.2 Master Link Pliers
- SD-2 Shop Screwdriver: #2 Phillips
- SW-7.2 Triple Spoke Wrench
- TL-1.2 Tire Lever Set
- TWS-3 Torx Compatible 3-Way Wrench
$195.00
Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing.
The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems.
These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs.
With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.
$167.95
The 37-piece SBS-3 from Park Tool is a comprehensive, shop-quality set of sockets, hex bits, and Torx compatible drivers selected specifically to tackle a wide variety of common bike repair needs. The SBS-3 also includes flat-faced sockets in common sizes for work on suspension forks. Ideal for use with Park Tool torque wrenches, the 3/8" drive bits and sockets are forged from tough, chrome vanadium steel and nickel chrome plated for lasting durability.
$160.00
- Bearing extractor set for small bearings
- (1) 608, (1) 609, (1) 6000, (1) 6001
$159.95
Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included).
- Carefully selected combination of Chrome Vanadium and S-2 tool steels
- 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included
- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless
- Machined, chamfered tips allow easier insertion into hex fittings
- Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or over-sized hexes fast and easy
- Sliding T-handle creates increased leverage and multiple access positions
- Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage
$156.95
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
- Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches
$155.95
The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance.
The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
Includes:
- Two 20 mL syringes
- Two hose assemblies with shutoff clips
- One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems
- One open-ended hose assembly
- Bleed funnel with stopper
- Two 10 mm/12 mm universal bleed blocks
- Two 11 mm bleed blocks
- Two adjustable syringe holders
- M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2)
- M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2)
- M6 x 0.75 adapter — Magura®
- M6 x 1.0 adapters — universal (x2)
- M6 x 1.0 adapter — Promax®
- M7 x 0.75 adapter — Shimano®
- Hose compression sleeve — universal
- Fluid disposal bag
- Set of spare O-rings and hose
- Replacement parts available
- Brake fluid not included
NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.
$149.95
- Incredibly compact torque wrench with adjustable range from 2-10Nm
- Reversible ratcheting head
- Includes a 5 bit storage compartment that attaches to the wrench for storage
- Also includes the following hex bits 3 4 5 and T20 and T25 Torx bits
- P
$147.95
The CT-15 is a professional-grade tool designed to drive rivets in and out of any bicycle chain, from beefy single-speed half-link chains to the latest 13-speed systems. The unique triple-wide floating shelf ensures that every chain is securely fixtured and centered during use. The ergonomic handle stores spare driving pins as well as a peening anvil used for peening Campagnolo® 11, 12, and 13-speed chains. Built for daily use and fully rebuildable.
- Compatible with single-speed bicycle chains including 1/8"", 3/16"" and half-link
- Compatible with all 5 to 13-speed derailleur chains, including SRAM® 12-speed Flattop™, SRAM® 12-speed T-Type, Shimano® 12-speed XTR®, and Campagnolo® 13-speed Ekar™
- Includes removable anvil for peening Campagnolo® 11 to 13-speed chains
- Includes two spare driving pins (part #2987)
$139.95
- The 8-Bit Chainbreaker + Utility Knife multi-tool has four functions and can be nested with 8-Bit Pack Pliers
- Features a chain tool on one end and a mini utility blade on the other. The chain tool is operated by a 3mm hex L key that doubles as a tire plug insert
- The handles of this multi-tool slide open to provide storage for tire plug inserts, valve cores, and a spare mini utility blade
- Strong, lightweight, and designed to fit in a tool wrap, jersey pocket, or frame bag
- Chain tool is compatible with all chains
- L key has a 3mm hex on the short end and a forked tire plug insert on the long end
- Utility knife blade is retractable
- Items for internal storage are sold separately
- Multi-tools in the 8-Bit System attach to each other with magnets and short pins
- Tool Kit 2 includes 8-Bit Tool, knife/chainbreaker, and disc brake tool
$134.95
Designed and built specifically for a wide variety of bicycle Torx compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite Torx compatible set, the THT-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included).
- Carefully selected combination of Chrome Vanadium and S-2 tool steels
- T6, T8, T10, T15, T20, T25, T30 and T40 Torx compatible wrenches included
- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless
- Sliding T-handle creates increased leverage and multiple access positions
- Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage
$120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task.
- Award-winning and universally loved
- Molded box construction and proprietary plastic blend makes these the strongest levers available
- Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping
- Bold shape makes it easy to remove the tightest of tires without bending or breaking
$114.95
With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case.
- 10–60 Newton meter range (88–530 Inch Pounds)
- Adjustable in 0.25 Nm increments
- Ratcheting 3/8" drive
- Reads and registers for both left hand and right hand threading
- Dial-adjust system allows desired torque setting to be preset
- Calibrated to be accurate to +/- 4%
- Length: 36.2cm (14.25")
$109.10
Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening.
- Holds nipples in place but allows for up to 5 adjustments before compound breaks down
- Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond
- Developed in conjunction with Loctite
- Includes two 10ml bottles
$106.00
- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
- Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
$104.95
The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy to use, affordable and it works on nearly any bicycle spoke, no matter its diameter, material or shape.
$102.95
Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.
$101.95
With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.
$99.00
$125.00
21% Off
Roughly 70% of damage to high-end carbon components like seat posts, handlebars, and stems happen when making adjustments without using torque measurement. This problem is accentuated by the majority of adjustments occurring on the roadside or trail-side. T-Ratchet + Ti-Torque solves these problems by delivering a highly ergonomic tool with a torque measuring extender that provides real-time feedback as you are tightening the fastener. The Ti-Torque beam has three separate scales on it, 2-6, 3-5, and 4-8, which allow you to easily see when you've reached your desired torque setting. Ti-Torque weighs in at a mere 30 grams meaning you'll hardly notice it's there until you need it. The T-Ratchet uses interchangeable magnetic components to convert from a screwdriver to a ratchet, to a ratcheting T-Handle in seconds, which gives the user the ability to have several tools at once in an extremely small package.
- Ti-Torque beam with three separate scales for measuring 2-8Nm
- Precision ratchet with convertible magnetic extension
- Steel bit extender
- S2 steel Hex bits: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm
- S2 steel Torx bits: T10, T20, T25
- S2 steel 2mm Phillips head bit
- Duck-waxed canvas carrying case measuring 120mm x 70mm x 30mm
- Kit weight: 220 grams
$99.00
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal.
- Pack of 10, fits 9/16" pedals.
$99.00
- Pedal thread inserts are used to replace damaged threads in cranks
$97.95
Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.
$94.95
Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop.
- High-torque, industrial steel wrenches
- Straight hex shaft on the short side, ball end on the long side
- Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm
- Comfortable, ergonomically designed nylon handles fit perfectly in your hand
- Durable wall/pegboard mount tool holder allows easy access and organization
$89.99
- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid
$86.95
Engineered for fit, function, and leverage, these L-shaped shop-quality Torx compatible wrenches are a must have for every workshop.
- High-torque, industrial steel wrenches
- Torx compatible drivers at each end
- Includes T6, T8, T10, T15, T20, T25, T30, and T40
- Comfortable, ergonomically designed nylon handles fit perfectly in your hand
- Durable wall/pegboard mount tool holder allows easy access and organization
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$84.95
The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers solving a high percentage of shifting problems.
- Gauge bar made of heavy gauge, chrome plated steel
- Adjusts to fit 20" to 29"+ wheels
- Replaceable threaded tip
- Upgraded large inner shaft for added strength*
- Tighter tolerances for improved accuracy*
- Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers*
*Compared to DAG-2
$83.00
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following:
• 2 syringes/fittings
• bleed blocks
• Torx tool
• Crow's foot
• Bleeding Edge Fitting
• DOT 5.1 hydraulic fluid
$79.99
Jagwire's Pro DOT Bleed Kit comes with the right fittings to bleed Avid, Formula, Hayes and Hope hydraulic-disc brakes for optimum braking performance. You can buy it with or without Finish Line DOT brake fluid.
$77.95
This tool set consists of 4 / 5 / 6Nm TorqSockets that will work with any mini tool containing a 5 mm Allen wrench (or single 5 mm Allen wrench). Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. A carry case neatly stores three preset TorqSockets (4 / 5 / 6Nm) and the 5 most popular tool bits (3 / 4 / 5 mm hex & T20 / T25 Torx).
- Added Feature: Rubber Strap, Carry case
- Functions: 15
- Allen Bits: 3/4/5 mm
- Tool Material: Hardened steel
- Torx Bits: T20 / T25
- Torque Value: 4/5/6 Nm
- Size: 8.2 x 5.1 x 2.7 cm / 3.2” x 2” x 1.1”
- Weight: 130 grams
$74.00
Shimano Genuine Professional disc brake bleed kit
Includes:
- TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port)
- TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port)
- TL-BR001 Syringe unit
- 4-pcs set of Bleed Blocks (Piston spacer)
Features:
- New oil spill guard lid with an integrated oil stopper holder
- Improved syringe unit design now using a stronger threaded tube joint and revised locking clip
- Bleeding instructions available for download under 'Documents & Links' below
$72.95
"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings:
• Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose
• Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS
• Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm
• Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire
• Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes
Also included:
• Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing
• Guide magnet — routes guide cables through the frame from the outside"
$71.95
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.
$71.95
What's your seatpost size again? Park's Digital Caliper accurately measures seatposts, head tubes, bearings, spoke diameters, etc. It's a precision instrument built accurate to 0.01mm with a stainless-steel mechanisms and a rugged composite body. The tool’s ability to measure in metric, decimal inch, and fractional inch makes it an indispensable home workshop tool. It features an automatic shut-off and comes with a protective sleeve and the battery.
$69.99
The Muc-Off 8 in 1 Bicycle Cleaning Kit is perfect for any lover of bikes. Complete with Muc-Off's Nano Tech Bike Cleaner, Expanding Microcell Sponge, Soft Washing Brush, Detailing Brush, Claw Brush, Two Prong Brush, Bike Spray and Storage Tub this kit has pretty much everything you need to keep your bike looking nice and tidy. It makes a great Christmas or birthday gift for your bicycle-obsessed friends and family.
This kit isn't style-specific either. No matter if you're into Road, MTB, Cyclocross or just getting from A to B, this 8-in-1 kit solves even the most annoying bike cleaning problems!
$69.99
- Updated jaws work on track cogs, cog & bb lockrings, e-bike chainrings, and cassettes.
- Updated adjustment knob features gear size indication for quick reference of the current tool setting.
- Adjustable plier design securely locks in place ensuring positive engagement and preventing slippage.
- Fits 9-23 tooth gear sizes and 40-46mm OD lockrings with opposing notches. Compatible with all multi-gear cassettes and all standard width cogs and e-bike chainrings. Visit pedros.com/chainfit for the latest compatibility information.
The Vise Whip is simply a better solution for holding your cassette during removal and now also works on track cogs, cog & bb lockrings, and e-bike chainrings. This innovative tool was developed by Pedro's in close collaboration with legendary frame builder and cycling technical author Lennard Zinn. The Vise Whip is beautifully simple to use. Once you try it, you'll never go back to a chain whip again.
$65.00
- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+)
- Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares
$62.95
Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.
$56.00
Handy and affordable, this tool makes it easy to get a clean cut every time.
- Securely holds hose while cutting
- Replaceable blade
- Metal construction holds up to frequent use
$55.00
- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+
$55.00
RockShox, 11.4118.038.001, Service kit, Monarch XX B1 2014+
$55.00
With 20 tools, the Venti is the kitchen sink of multi-tools. Everything you might need for any road or trailside repair. Never get stuck because you left a tool at home again.
- Forged chain breaker for 10-12 speed chains
- Magnetic masterlink storage
- Forged and plated steel tools
- Includes: 2, 2.5, 3, 4, 5, 6, and 8 mm hex; 8, 10, 20, 25 Torx; Phillips #2/SL4; 7mm box wrench; 8mm flare nut wrench; 10mm open end wrench; disc pad spreader; valve core remover; and 13g/15g spoke wrenches
- Weight: 160 g
- Dimensions: 80x46x14 mm
$55.00
High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing.
- Hex-Plus allows socket head screws to live longer
- Hexagonal ballpoint on the long arm
- With Take-it-easy tool finder: color coding by size
- Color coded, easy-to-grip plastic sleeve, even at low temperatures
$54.99
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders.
- This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in
- 50 cubic inch seat bag with hook-and-loop mounting straps
- Three MSW tire levers
- Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers
- Glueless patch kit with six patches, sandpaper, instructions
- Windstream Push-On CO2 inflator head
- Two 20g CO2 cartridges
$54.99
- Adjustable torque wrench with ergonomic design
- Twist dial adjust torque in preset 4, 5, and 6Nm settings
- Includes 3, 4, and 5mm hex bits and T25 Torx bit
$53.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
$52.95
Features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots.
- Includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T15, T25 Torx and #2 Phillips bits, CrMo steel chain tool, two engineering grade polymer tire levers and magnetic bit holder
- Chain tool is compatible with single and multi-speed chains up to 12 speed (NOT including Campagnolo hollow pin chains)
$52.00
- Essential mechanic tools to properly service and maintain all RockShox products
- Clamps the shock body for easy maintenance
$52.00
Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268
$50.99
BB30 service kit for SRAM DUB cranks.
- Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips
- Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
- Enduro ABEC-3 bearings
- Use with SRAM DUB cranks
Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$50.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
Page 1 of 5
Next page