Handlebar Grips/Tape

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

Grippler gives you the moisture shedding, long gripping sensation you crave, with the hard wearing resilience you expect from Race Face. Our proprietary compound and diamond buff finish feels great with both gloves and bare hands - and with ramped grip profile on finger-side plus varied grip depth on palm-side, Grippler will bring you to a higher level of digitization. Available now in 10 colours, and two sizes, the Grippler surpasses industry standards for gripabilty. And now with Double Lock Ons the Grippler EVEN GRIPS ITSELF. Get a grip, with the Grippler. - Directional ramped logo underside - Proprietary compound extends over Dual Lock Ons - Vibration dampening, hard wearing, moisture shedding

- Gel and DuraCork rubber compound grip provides a cork look and feel with improved durability and grip - Ergonomic design provides enhanced comfort on long rides

- PU and microfiber material - Extra grippy for all conditions - Smart silicone adhesive back (easy to replace) - Thickness: 2.5mm

• Four gel pads for under bar tape • Dampens vibrations • Maximizes comfort in all hand positions • For superior comfort use with Planet Bike Comfort Gel Tape (sold separately)

We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle. The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area. The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits. - Diameter: Avg. 30mm - Weight: 90g/pair - Width: 133.5mm - Durometer: 25A Happy Camper Compound - Clamp Style: Closed End, single clamp

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

Oury single sided V2 lock-on grips.

The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included

Origin-8's Pro Cork Handlebar Tape is made from real cork and features an adhesive backing. The tapered edge gives you a smooth, comfortable wrap that feels wonderful. And, you'll also get a set of handlebar plugs to finish the job.

- Zig Zag pattern provides comfort and grip with or without gloves - Dual lock rings securely attach grip to bar - Outboard lock rings have replaceable integrated bar end caps - 130mm length with 30mm diameter grip area

Superior comfort and grip in wet or dry conditions - Double layer construction - Available in your choice of seven colors - Double layer construction - 2.0mm tape thickness - Length: 2100mm

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

- Grooved channels prevent mud and water buildup - Overmolded flap gives added protection on outside clamp - Unique undercut pads provide slim comfortable feel with maximum grip - Custom flanged design provides hand support with more usable grip surface

Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench

- Designed with help from Tinker Juarez - Large diameter grip at 34.5mm - Offset grip design provides more padding on the palm side of the grip - Soft TPE end offer improved comfort and grip protection - Made from ODI exclusive A.I.R.E compound for reduced weight and improved vibration dampening - Contoured surface for improved comfort on longer rides - Ergonomic finger cutouts provide improved grip in all condition - Version 2.1 Lock-On system ensure 100% slip-free performance

Traditional EVA tape looks great on the bike and feels comfortable on the hands no matter how long the ride. EVA tape is flexible and comes with an adhesive backing so it wraps well and stays put during and after installation. - EVA vibration-damping foam increases grip and comfort - Adhesive backing for perfect bar placement - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

The extra material on MSW's EFG-100 grips isn't for good looks: it's to spread the pressure across more of your hand, resulting in less stress and fatigue. • Comfortable, ergonomic shape • Reduces hand fatigue while riding • Thermoplastic rubber

MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal. - PU material with anti-slip coating improves grip over traditional cork material - Gel backing provides vibration damping and extra comfort - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

- Smaller diameter and shorter length (105mm) comfortable grip made from elastomer material that lasts longer than conventional grip rubber - The softness of the single compound grip will keep your hands feeling pampered while riding

The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest single compound grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 33.25 mm

The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)

The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 125 grams - Diameter: 33 mm

Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Lock-on grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 120 grams - Diameter: 31.5 mm

The classic upper pattern with a waffle finger hold for a better grip. - Compatible with MTB, BMX, ATV, PWC - Weight: 101 grams - Length: 135mm - Diameter: Medium (31mm)

- Medium Diameter (32.25mm) - Length 135mm - 118g - Handlebar Diameter: 22.2mm

Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.

Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.

- DSP Bar Tape V2 features a new pattern, an upgraded polymer and a screw-in bar plug - The new pattern is more technical with a new design and multiple layers of depth - The polymer has new formula enhanced for more durability and comfort - The new plug provides a clean, tight finish.

- High-friction silicone coating offers extra anti-slip and hand feel in wet condition - Ultra-light EVA foam backing - Shock proof foam with water wave pattern - Includes bar end plugs and finishing tape

• Made from soft and durable Kraton rubber • Custom waved raised surface • Anodized double-side lock-on clamp • 135mm

Fi'zi:k's line of Tempo bar tapes are designed for an unparalleled performance. Bondcush is a layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is their chunkiest option that combines comfort, versatility, and durability, ideal to tackle all kind of roads. Soft touch is a matt-look, silky, moisture absorbing surface. - Bondcush construction 3mm thick - Soft touch

Fi'zi:k's line of Tempo bar tapes are designed for an unparalleled performance. Microtex is the thinnest option for pin-sharping handling and control, while its classic touch is a durable perforated leather-like texture, with traditional aesthetic and a smooth surface to slide easily to different riding positions. - Microtex construction 2mm thick - Classic touch

Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Solocush is their most streamlined cushioned construction – a single-layer chunky platform to rest on during longer rides without compromises on weight. - Tacky finish adds a sticky nonslip surface with a raised texture for ultimate grip in every condition. - Solocush construction 2.7mm thick

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly. - Length: 136mm - Lock On: Yes - Weight: 135g

The GA3 Single Twist-Shift is designed for 1x twist shift set-ups like SRAM XX1 and Pinion. The fully integrated, rubber enclosed lock-on clamp (collar) on the outside of the grip provides plenty of space for a wide grip stance. This concept combines the relief benefits and wrist support of an ergonomic wing grip with the freedom of movement of rounder style grips. With DNA from our popular GA2, the GA3 offers optimized shapes and advanced surface textures to reduce gripping forces. The super soft, UV-stable rubber compound is exclusively manufactured for Ergon in Germany and allows greater grip, delivering more control on demanding terrain. Rubber covered outer clamps offer an even wider grip position for generous space. The end plug is replaceable. Compatible with carbon handlebars.

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

Ergon GD1 Evo grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No

The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g

The GS1 Evo reimagines what ergonomic comfort can be for touring, trail and E-Bikes by minimizing aching hands and numb fingers. Ergon took the best-selling GP1 winged grip and evolved it with popular characteristics of the mountain specific GA3. The GS1 Evo features a larger supportive wing than the GA3 and a sleeker profile than the GP1, a specific textured grip zone for the thumb, fingers and palm and a softer overall touch. Always prioritizing materials, the GS1 Evo is composed a proprietary rubber compound Made in Germany. From quick jaunts across town to endurance events to journeys across continents, the GS1 Evo is a new favorite among many riders! - Ergonomic performance comfort grip - Reduces hand and wrist discomforts - Made in Germany

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

The bar end of the GP2 has been re-engineered, and improvements made to the product – better ergonomics, function and a higher quality feel. The GP2 now has a bar end with an installation friendly clamping system – as do all Ergon bar end models. This makes fitting extremely simple. Carbon bar compatible.

The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.

Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting

The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. CR stands for Chunky, Racer’s Mix. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Extra Chunky XXL 8.25” are over 60% longer than standard grips! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation Great for: - Exercise Equipment - Touring bikes - Track and pursuit bars - Fixed Gear - BMX - Scooter - Cruiser - Road drop - Strollers - And so much more! *Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.

ESI Grips NEW RCT Wrap is perfect for Road, Cyclocross, or Triathlon riders, especially riders looking for extra shock absorption and comfort compared to a normal bar tape. ESI RCT Wrap is constructed for a smooth overlay and customizable thickness. If you are looking for a thick grip, wrap it looser. If you are looking for a thinner grip, wrap it tighter. It's that easy! - 134-176 grams (Depends on how you stretch) - 3.5mm Thick - 1" Wide - 2 Rolls at 6'2" each - Custom Fit - Stretchable - Custom Density - Shock Absorbing - Comfortable - Super Tacky - No Adhesives - Long-lasting - Easy to Install Package Includes: - 2 long silicone wraps (for wrapping bar) - 2 short silicone wraps (for under hood) - 2 Silicone Tapes (adhere to themselves – 1-time use) - 1 pair of NEW custom larger Bar Plugs

Features and Benefits - 250cm in Length—accommodates bars up to 50cm - Grip compound maintains traction when wet - Durable stretch for installation - Vibration-damping backer strip - Hard-wearing construction - 3mm thick What It Is ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability. Science & Insight For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.