Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$81.99
Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork
$39.95
- Enhanced aerobar position performance - Long term pressure distribution - Anti-slip surface Upgrade your Profile Design aerobars to maximize your performance and enhance comfort while in the aero position. The Ergon CRT Arm Pads for Profile Design help to maintain the perfect aero position for many hours during time trials and triathlons. Made from high end OrthoCell foam, the pads prevent pressure discomforts and noticeably dampen road vibrations. The surface is slip-resistant to help you fully focus on your race!
$15.00
Air spring seal kits for Fox suspension repair and rebuild.
$20.00
Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild
$130.00
38 Air Shaft Assembly for Fox suspension forks.
$13.75
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$13.75
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$14.99
Dirt and grime have no place in your bottom bracket. Keep them at bay by always ensuring your FSA BB30 Bearing Covers are in good shape. Keep a replacement set on hand to extend the life of your expensive, silky-smooth BB30 bottom bracket.
$14.99
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers
$14.99
This is an FSA Self Extracting Crank Bolt for Hollow Carbon MegaExo Light Cranks - Designed to fit hollow carbon FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers
$21.00
Alloy headset spacer to fit 1 1/8in fork steerers. - Alloy with FSA logos
$21.99
Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets
$22.00
FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible
$28.00
- BB30 Bearing, Pair, 230-5026 - 30x42x7mm
$28.99
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$29.99
Replace your old aerobar armrest pads and upgrade to the comfort of Fizik's TechNoGel Tri Pads. Made from Fizik's shock-absorbing Technogel, these cut-to-fit pads make every second in the aero position easier and more comfortable. Plus, the pads are easily removed for cleaning.
$15.00
- Replacement pins for tool shed chain tool. - Bag of 10
$40.00
Giant Contact S Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provide you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction. Features - 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp
$122.00
Giant's Connect SL Ski-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the ski-jump bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
$35.00
Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - CNC-machined aluminum lever and clamp - Brass cam allows increased durability clamping force - Laser-etched logos
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments
$44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
$29.99
The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$2.39 - $4.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$8.00
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$16.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains
$55.00
The Southpaw family of remote levers are designed for a secure feel without added complexity and weight, while incorporating ergonomics that compliment modern cockpits. - Ergonomically designed for 1x setups - Universal lever body - Integrated barrel adjuster - Stainless steel hardware - Understated graphics
$7.99
MSW Seatpost Clamps keep your saddle and seatpost from moving around while you’re out riding. Tough and dependable, they’re available in polished silver or black finishes, as well as four common sizes. - MSW Seatpost Clamp - 28.6mm, Black
$15.00
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame
$17.55
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually
$17.99
Replacement microSHIFT bar end shifter mounts allow you to replace broken units or convert microSHIFT thumb lever shifters to bar-end mount. - Compatible with microSHIFT road-pull 8, 9, and 10-speed shifters only - Expander plug compatible with handlebars with internal diameter of 19-21mm
$25.00
North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included
$29.99
North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included
$14.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
$22.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
$14.99
Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight
$15.29
Replacement brake hoods for Origin8 Pro Force road levers
$17.00 - $23.99
- Unidirectional carbon fiber 1-1/8" headset spacers - Sold in bags of 5
$17.45
- AL6061 alloy construction - Non-keyed design - Jar of 20 spacers
$18.69
Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts
$19.99
- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts
$19.99
• Emergency universal replacement derailleur hanger • CNC machined aluminum construction • Anodized and laser etched finish
$20.39
- Converts CenterLock road hubs to accept 6-bolt rotors - Low-profile design for road disc applications - Compatible with standard Quick Release as well as Thru-Axle road hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts
$24.99 - $25.00
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
$38.29
Replacement pulley set with ceramic bearings. Compatible with 7,8,9, and 10-speed Campagnolo, Shimano, and SRAM drivetrains.
$41.99 - $57.79
• Machined aluminum mounting arm • Delrin (engineering grade thermoplastic) chain guide body • Adjustable design • Fits 32T to 38T chainrings • Compatible with 1x drivetrain systems • Clamp mount: 31.8-34.9mm • Weight: 75g (BB Mount), 88g (clamp mount), 80g (Mini)
$94.99
• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs
$139.99
Gain an aerodynamic advantage with Origin-8's Tri Clip-On Aero Bars. These aluminum clip-ons fit a wide range of handlebars. With independent arm rests and bar-angle and reach adjustments, it's easy to get a great-fitting aero setup.
$69.00
Dropper post levers are something a lot of us overlook—we want our dropper to work but don't think about the button that makes the magic happen. After testing a bunch of levers, from the plastic ones to the ergonomically weird, even the best in class, we decided we could do better. So we made the Loam Lever. It's the most adjustable lever around, ensuring you can modify it to fit your exact ergonomic specifications. The lever's grippy, injection-molded pad has got your back in sloppy weather conditions. And, speaking of weather, we made sure the whole thing was as weatherproof as possible, meaning your lever won't squeak, bind up, or fail after being in the rain. The Loam Lever Has 5 Key Characteristics: 1. Adjustability - We believe precision matters, this lever provides two forms of adjustment so you can dial-in your perfect placement.  2. Weather Proof - Oversized high-quality sealed bearing paired with an additional seal and all stainless hardware for longevity and durability. 3. No-Slip Grip - Speaking of weather, the Loam Lever features a grippy, injection-molded thumb pad so you can drop or raise at the right time in even the sloppiest of conditions. 4. Techy AF - Custom CNC machining throughout the whole design of the Loam Lever for precision and weight reduction. 5. Direct Mount - Available in SRAM's MatchMaker X for Guide brakes and Shimano's I-Spec II for XTR M9000, XT M8000, SLX M7000, and DEORE M6046
$14.99
Sold individually or as part of Problem Solvers' 6-bolt adapter assembly, this lock ring is meant for use with Shimano Center Lock compatible hubs. - External splines; compatible with external bottom bracket tools - For use with 12 – 20mm thru-axles - Aluminum construction
$16.00
The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.
$16.55
The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 12.5mm long and made of durable chromoly.
$17.35
The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece is a small but crucial part of your cantilever setup.
$17.35
The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 16mm long and made of rustproof stainless steel.
$17.99
The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.
$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
$23.75
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.