Rear

More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately

The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately

Replacement pulley set with ceramic bearings. Compatible with 7,8,9, and 10-speed Campagnolo, Shimano, and SRAM drivetrains.

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These Mezzo rear derailleurs are light, robust, and reliable. You can count on them to get any bike on the road. - Weight-saving aluminum bracket body and outer link - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

R-series rear derailleurs are designed to work with 8 and 9-speed Shimano-compatible road shifters. These R8 rear derailleurs have composite and steel parts that weigh more but have the same durability and performance as R9 and R10 derailleurs. - Steel pulley cage for extra durability - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset and 28T max cog - Long cage for triple crankset and 28T max cog

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. Marvo LT rear derailleurs are built with precision rigid aluminum construction. Let these miracle workers get any bike rolling again. - Lightweight aluminum construction - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

R-series rear derailleurs are designed to work with Shimano-compatible road shifters. These R9 rear derailleurs combine compatibility, weight savings, and a robust design. - Weight-saving aluminum bracket body and outer link - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 9 and 10-speed road systems - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset 28T max cog setup - Medium cage for double crankset and 34T max cog - Long cage for triple crankset and 28T max cog

Not everyone needs the added chain retention of a clutch derailleur. For those riders, we offer a non-clutch version of our innovative ADVENT derailleur. Without the clutch in the system, the shifting effort at the lever is reduced. While still capable of handling an 11-42T cassette, the rear derailleur is the perfect choice for commuter or touring bikes that can benefit from using a wide-range gearing system. - Direct cable routing for smooth and responsive shifting - No clutch for ultra-smooth shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only

Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only

With a race-worthy weight and the right gearing for any situation, microSHIFT's top-of-the-line ADVENT X rear derailleur delivers high-end performance without high-end headaches. By using a 10-speed chain and wide range 11-48T cassette with predictable, evenly spaced gear steps, ADVENT X allows you to find the right gear even in challenging conditions. Add in microSHIFT's proprietary ratchet-and-pawl clutch, larger pulleys with taller teeth for better chain retention, and metric adjustment hardware, and you've got everything you want and nothing you don't. - Compatible with ADVENT X 10-speed drivetrains only - Compatible with standard 10-speed chains - Ratchet-and-pawl clutch provides chain security and can be turned on and off with a switch - Metric adjustment hardware - Larger pulley and taller teeth for better chain security and higher ride height

- CNC machined 6061 aluminum - Black anodized finish - Distance between mounting holes: 28mm - Attaches to frame with (2) M3x8 flat head screws - Fasteners not included - Replaces Cannondale Hanger #KP284

The Box One 7-speed Downhill Rear Derailleur is based on our 11-speed drive-train but has a signature white short cage and beefed-up compact linkages. Other fab features include a fully adjustable Tri-Pack(TM) Clutch, and optimization for an 11-24T cassette. These guys are tuned for the most demanding downhill runs. FEATURES - Durable 3D Forged Linkages - Precision Sealed Bearing Pulleys - Pivot-Tech™ Cable Stay - Forged Inner and Outer Cage - Adjustable Tri-Pack™ Limited Slip Clutch SPECIFICATIONS - Speeds 7 Speed - Materials 6061-T6 Aluminum, Carbon fiber/Nylon Composite - Pulleys Precision Sealed Bearing - Cage Size DH - Minimum Cog 11T - Maximum Cog 24T - Hardware Aluminum / Cr-Mo alloy - Color/Finish Hard Onyx™ - Weight 279 grams / 9.8 ounces - Technology Adjustable Tri-Pack™ Limited Slip Clutch, Pivot Tech™