- Complete cable kits for internal three speed hubs
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$6.00 - $7.00
Stainless steel cables are extruded to provide a smooth low-friction surface.
- Wet or muddy condition cable sealing solution
Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets
Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.
Giant's Brake Cable And Housing Set contains everything you need to get your braking power back. The galvanized cable is double-ended for use with road and mountain bikes, and is compatible with almost all brakes. The full-length housing includes all necessary aluminum ferrules.
Giant's Slick brake cable is pre-stretched for high responsiveness. This galvanized cable is double ended for use with road and mountain bikes and is compatible with almost all brakes.
Jagwire's Hooded Shift End Caps fit over the ends of your shift cable housing sections to protect them and keep the cables and shifting operating smoothly. These quality aluminum cable housing ferrules are "hooded" (the little tip on the end) to help prevent dirt and moisture from getting inside the cable housing. You get a bottle of 30.
Jagwire's Cable Guide Stoppers are rubber adapters that fit over hydraulic brake lines so that the lines will fit into various open-type frame cable-housing stops and stay securely in place. You get a pack of 50.
Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.
$5.49 - $49.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
Jagwire's Universal Sport Brake XL Cable Kits are the perfect way to enhance your braking performance while adding a little style to your bike, too. Compatible with both mountain and road brakes, and in an extra-long size, the slick stainless cables provide smooth, powerful braking. And with the housing and all the needed parts included, these cable kits are easy to install and ready to deliver years of smooth positive braking.
Jagwire's Universal Sport Shift XL Cable Kit is the perfect way to enhance your shifting performance and precision while adding some style to your bike, too. The cables and housings in this kit are extra long and there are anti-kink end caps, so it's a great kit for longer-than-usual cable-routing setups and folding bikes. The cables are made of stainless steel for excellent durability and corrosion resistance. They fit Shimano and SRAM shifting systems. And with all the needed parts included, this kit is easy to install and ready to deliver years of flawless gear changing.
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Jagwire's Universal Pro End Cap Packs contain a complete selection of aluminum housing ferrules and cable end caps (crimps) so that you can properly setup your cables and housing sections and prevent fraying cables. They come in 6 colors for customizing your ride, too.
Jagwire's Universal Pro Non-Crimps are a custom finishing touch for the ends of your brake and shift cables and prevent them from fraying so the cables keep functioning. Also, because they're not crimped in place and go on/off without tools, you can easily remove them for holding the ends of the cables to make adjustments. Best of all, the Non-Crimps are made of soft, safe rubber and they come in colors so you can add some more style to your ride.
Jagwire's Straddle Cables With Adjusters are for use on TRP Eurox and Paul Component Engineering cantilever brakes (brakes sold separately). The adjusters fit onto one brake arm and allow you to turn the rubber-coated ends of the adjusters to fine-tune your brake adjustment by tightening/loosening the Straddle Cables (included but not shown in the photo). You get 2 Straddle Cables and 2 Adjusters.
$3.99 - $5.49
Jagwire's Shift Inner Wire is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.
Jagwire's Hydraulic Fittings Combo Box is a handy parts box for your home shop that includes a variety of common fittings and seals for a range of disc brakes from Avid, Formula, Hayes, Magura, Shimano and Tektro.
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Magura brakes and includes enough hardware for one bicycle.
Giant's Stainless Steel brake cable is pre-stretched for high responsiveness. This cable is double ended for use with road and mountain bike cable-actuated brakes.
Giant's Slick derailleur cable is pre-stretched for high responsiveness. This galvanized cable is double ended for use with Campagnolo and Shimano/SRAM drivetrains.
Giant's Slick stainless steel derailleur cable is pre-stretched for high responsiveness. This stainless, galvanized cable is double ended for use with Campagnolo or Shimano/SRAM drivetrains.
Giant's Derailleur Cable And Housing Set contains all the parts you need to get your bike's shifting back on track. The galvanized cable is double-ended for use with Campagnolo or Shimano/SRAM drivetrains. The full-length housing includes all necessary aluminum ferrules.
Page 1 of 6 Next page