For The Rider

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The limited-edition BMC x Suplest Road Pro Edge+ 2.0 cycling shoe is designed for high velocity and meets the demands of the world’s best racers. The thin microfiber upper from Japan combined with the stable and air-permeable 3D-mesh in the forefoot offers high wearing comfort. The BOA® Fit System Li2 allows precise fixation of the foot. To enhance comfort, BMC uses a thin carbon shield integrated in the tongue to spread the pressure over the foot. The stiff ERGO 360° carbon sole in combination with the SOLESTAR insole allow an efficient boost power to the pedal during the whole ride. BMC's premium road shoe combines efficiency with comfort.

LIMITED DURA-ACE SPECIAL EDITION OF OUR ULTIMATE ROAD COMPETITION SHOE. FEATURES - Shiny set of low-profile BOA Li2 metal dials dazzle with their premium looks and quick micro-adjustments. - 360º surround wrapping upper with enameled finish creates a supremely engineered fit with a dash of luxury for all riders. - Tastefully refined glossy black heel cup with anti-twist stabilization secures optimal foot positioning for intense acceleration and high tempo - cadences. - Function-specific zones and scientifically optimized upper materials maximize fit and pedaling performance. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Adjustable powerzone lace guide securely holds forefoot.

The S-Phyre XC902 is an uncompromising off-road racing shoe. Packed with pro features and innovative racing technology, it’s ultra-rigid, ultra-lightweight and designed for outstanding pedaling performance. The carbon midsole and wraparound microfiber upper provide stability and comfort, while the ULTREAD® rubber outsole offers unrivalled grip off the bike. Features: - The S-PHYRE SH-XC902 is the Ultimate Off-Road Racing Shoe: Designed to dominate XC, CX and MTB trails - Ultra-Lightweight: 70g lighter than its predecessor and fully optimized for speed, efficiency and power - Professional Fit: Full surround upper, rounded heel and slim toe box for a secure, glove-like fit - Superior Traction: New ULTREAD® rubber outsole with technical tread pattern provides the ultimate racing grip - SPD Cleats: Clip into SPD pedals for optimum pedaling efficiency on cross country and mountain bike trails

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

In the quest for ultimate performance, you should expect more from a helmet than "just" superior aerodynamics and lean weight. The Elemento features a revolutionary, new design with advanced technologies to deliver the very best safety and thermal comfort no matter what you ride: road, cross-country, cyclocross, or gravel (or all four). Designed in collaboration with the INEOS Grenadiers Cycling Team, the Elemento is aimed at professional and semi-professional athletes. Expect new standards in terms of aerodynamics, ventilation, and performance; expect nothing short of a revolutionary helmet for training and racing. BE AHEAD OF THE GAME The Elemento has been engineered to be both super-aerodynamic as well as to allow high levels of ventilation, thanks to its innovative design and the introduction of various pioneering technologies, such as Fluid Carbon 12 and Multipod. Fluid Carbon 12's composite technopolymer absorbs more energy from an impact than traditional materials and distributes the force generated more evenly across the entire helmet. This benefit has enabled KASK's technicians to increase the size of the internal channels, which improves ventilation, while simultaneously reducing the size of the ventilation holes for improved aerodynamics. Multipod is KASK's proprietary 3D-printed internal padding. This elastomer material enables the helmet to better withstand the energy generated by linear and rotational impacts. Multipod functions isotropically, meaning it withstands the energy from impacts the same regardless of the direction in which the force is applied. The Elemento's OCTOFIT+ helmet retention system allows for a more fine-tuned fit to provide greater safety and stability. A reflective graphic at the back increases rider visibility. TECH SPECS: Materials - Inner padding material: Merino wool - Chinstrap material: Polyester - Shell finish: Shiny Standard Detail - Standard: CPSC 1203 Weight - Weight: 300 GRAM

This shoe is tailored to the needs of performance-oriented XC riders. Racers benefit from the direct power transmission of the extremely stiff FACT carbon sole. The Boa twist locks offer precise adjustability, a secure hold and a high level of comfort through optimal pressure distribution. The upper material is supple, light and yet robust. Specialized's Body Geometry Fit features are another bonus for comfort and performance. - Thermoplastic rubber profile for sure-footedness off-road - The Body Geometry outsole and footbed are ergonomically designed and medically tested. They promote a clean vertical pedaling movement, which increases performance and well-being. - The two-screw hole system is suitable for all common MTB pedal systems. - The super-light sole made of highly rigid FACT carbon offers optimal power transmission. Stiffness index: 13.0

A lightweight, breathable woven race shoe made for comfort in the chaos. Professional cycling is the toughest sport in the world. What separates the winners from the rest is an ability to find comfort in the chaos. The Pro Team Shoe combines three advanced technologies to give you the edge even in your most uncomfortable moments. The entire upper section is made with a single seamless piece of woven fabric. This is Powerweave, a pioneering 3D-woven technology that provides maximum support, excellent breathability, and a flexible, frictionless fit, all at a minimum weight. With a hydrophobic treatment, the fabric repels moisture for efficient thermoregulation in any conditions and combines with a molded heel cup to hug the foot. Micro-adjustable dials, lightweight laces, and low friction lace guides come together in the latest Boa fit system, which provides a precision fit. The tongue is padded to disperse pressure from the laces across the top of the foot and eliminate pinch points. The dials also incorporate a quick-release feature for rapid removal. At the base of it all is our ultra-lightweight, full-length carbon sole. Engineered for consistent stiffness along the foot, it ensures optimal power transfer, with rubberized heel and toe caps for added durability. Though peak form and fitness can be elusive, racing comfort is now much easier to come by. - Signature Rapha toe strap is woven in - Padded tongue with Pro-Team bars - DWR treatment for weather protection - Grippy thermoplastic heel tread - Lightweight 250g (approx. weight size 42) - 3-bolt cleat/pedal compatible - Reinforced toe and heel for durability - Upper: 100% woven polyester - Sole footplate: Carbon fiber - EVA insole with soft antimicrobial microfiber top layer - Cleat bolts: 100% stainless steel

The S-Works Women's Road Shoe is Specialized's lightest and stiffest Body Geometry road shoe with unparalleled comfort, precise fit and maximum efficiency. A competition shoe for all women who really want to put their foot down! - Women's Form Fit with adjusted shaft height ensures a high level of comfort in the ankle area. It also creates direct contact between the shoe and the foot and ensures ideal power transmission - Body Geometry outsole and footbed promote a clean, vertical pedaling motion, enhancing performance and well-being - Ultra-stiff, extremely light sole made of FACT carbon enables direct power transmission even when driving hard. Stiffness index 13.0 - Revised Body Geometry SL insole offers optimized support and performance - Three thread inserts are suitable for common road bike pedal systems - Angled Velcro fasteners ensure an even, firm and comfortable fit of the shoe - Boa S2 screw cap can be quickly adjusted and ensures large-area pressure distribution and a secure hold. It is durable and virtually maintenance-free.

The Aether MIPS combines airy, open design with a revolution in rotational energy management to advance head protection for cyclists. Inside the Aether, a dual-density EPS foam liner helps to manage a wide range of impact energies, while also boasting deep internal channeling to provide cooling airflow. Giro's proprietary MIPS Spherical technology is integrated between the layers of EPS foam – instead of against the rider’s head – giving riders the benefits of MIPS without any obstruction to comfort or cooling power. Outside, a sleek 6-piece shell forms a stunning silhouette around the massive vents, which get added structural reinforcement via a shatter-resistant AURA reinforcing arch. The final touch is Giro's Roc Loc 5+ Air fit system, featuring 3-way fit tuning, that allows easy adjustment in seconds for the ultimate in comfort.

If you push the limits of downhill speed and big air, the S-Works Dissident is for you. That's because it's the lightest, most-ventilated, and technically advanced carbon fiber full-face mountain bike helmet out there. To help make sure of it, Specialized's 3D sculpted cheek pads and 4th Dimension Cooling System keeps things airy in the heat, while the Carbon Matrix shell keeps it light enough for all-day comfort. - Engineered to protect World Cup downhill and gravity riders - Meets the ASTM DH safety testing standards for impact protection and chin bar performance - Lightweight Carbon Matrix shell—target weight 1000g - 3D-sculpted cheek pads and updated crown pad design for improved ventilation and a more comfortable secure fit - 4th Dimension Cooling System and ventilation provides superior comfort - Magnetic chin strap buckle improves comfort and allows for easy, one-handed use - Helmet EJECT system compatible - Leatt brace compatible - Speaker compatible - Includes a padded travel bag with micro-fleece liner and external goggle pocket - Removable washable liner and cheek pads

LIGHTER, COOLER, SLEEKER, PLUS ALL THE ADDED PROTECTION OF SPHERICAL TECHNOLOGY POWERED BY MIPS® AND OUR NEW DRYCORE™ SWEAT MANAGEMENT SYSTEM: THE ARIES SPHERICAL IS LIKE NOTHING BEFORE. STRUCTURAL INTEGRITY The proprietary AURA II Reinforcement Arch makes everything possible. These shatter-resistant, translucent twin bridges run throughout the helmet, providing structural integrity without adding unnecessary weight. Aries’ ultra-low weight (~5% lighter than Aether), impressive cooling power and sleek, compact shape would not be possible without AURA II. SPHERICAL TECHNOLOGY This unique ball-and-socket design, powered by Mips®, helps redirect impact forces. Spherical Technology also boasts more comfort, improved airflow, and Progressive Layering (which mates two densities of EPS foam to address a wide range of impact energy). The results are clear: independent authority Virginia Tech has rated Aries #1 in reducing the risk of injury. It’s the best performing helmet they’ve tested so far – even out-performing much bigger, bulkier helmets at reducing risk. COOL COMFORT Deep internal channels connect with Aries’ massive front and rear vents. This system provides a path for cool air to flow over the rider’s scalp and exit the rear, taking excess heat with it. Aries outperforms our previous cooling benchmark, the Aether, with a 2.3% improvement in cooling efficiency. STREAMLINED SPEED When it comes to going fast, smaller truly is better. To craft Aries, we focused on reducing the frontal surface area to eliminate more drag. Add in tiny details like chamfered edges on the AURA II, and meticulously engineered internal channeling that actually speeds up the air as it exits the helmet, and Aries emerges as the climbing helmet that doesn’t sacrifice speed, reducing aerodynamic drag by 4% over Aether Spherical. Aries also debuts our revolutionary DryCore™ sweat management system. A soft, silicone bead is hidden within the plush brow pad that redirects sweat away from the forehead and to the temples, where it can evaporate more easily. LIKE NOTHING A helmet that feels like it isn't there: the all-new Aries™ Spherical is like nothing before. Its sleeker form and lighter weight (only 270 grams in size medium, CE certification), deliver sensational comfort and cooling power. Spherical Technology™, our ball-and-socket design powered by Mips®, adds protection by redirecting energy away from the brain in certain impacts, and Progressive Layering with dual densities of Nanobead EPS foam adds more comprehensive energy management. 24 Wind Tunnel vents are maximized by the AURA II Reinforcement Arch, while a plush DryCore™ brow pad manages sweat and combines with a network of intricately engineered deep internal channeling to elevate comfort. From the proven reliability and adjustability of the Roc Loc® 5+ Air fit system, to full lower hardbody coverage to enhance durability, to the meticulous production quality, the Aries is state-of-the-art performance, protection, and style. SPECS: CONSTRUCTION: - IN-MOLD CONSTRUCTION - NANOBEAD EPS FOAM - FULL LOWER HARDBODY COVERAGE VENTILATION: - 24 VENTS AND DEEP INTERNAL CHANNELING FIT SYSTEM: - ROC LOC 5+ AIR PRODUCT WEIGHT: - 275G (SIZE MEDIUM CPSC) CERTIFICATION: - COMPLIES WITH THE US CPSC SAFETY STANDARD FOR BICYCLE HELMET FOR PERSONS AGE 5 AND OLDER HIGHLIGHTS: - AURA II REINFORCEMENT ARCH - IONIC+™ ANTI-MICROBIAL PADDING - DRYCORE™ SWEAT MANAGEMENT SYSTEM - EYEWEAR DOCKING PORTS

Redefined Greatness The new synonym for victory, the Protone Icon helmet features the latest technological advances in safety, ventilation, and aerodynamics to make it an icon of road cycling. The Protone Icon takes its design from KASK’s winning Protone helmet and has improved upon it in every way possible. A redesigned internal frame gives the wearer greater safety. Seamless technology joins the lower and upper parts of the shell to give it a refined, elegant look and improved aerodynamics. The new OCTOFIT+ adjustment system optimizes the helmet’s comfort and stability, while a vertical stabilizer across the nape of the neck provides ergonomic neck support and delivers enhanced balance and a customized fit. Its large rotation cap coated in a special rubber increases finger grip, and a reflective insert in the rear helps keep the helmet’s wearer even safer. The internal lining is made of CoolMax® fabric which, as well as being comfortable and quick-drying, is also removable and washable. As is standard with all KASK helmets, the Protone Icon has been developed in accordance with the KASK ROTATIONAL IMPACT WG11 TEST protocol, an objective, scientific approach to measuring the helmet’s performance against rotational impacts.

The elements are in perfect equilibrium: performance, aerodynamics and safety. The design leaves you in no doubt: Protone Icon is KASK's new classic, an exceptional helmet for road, gravel, cyclocross and MTB cross-country. Every aspect has been redesigned to push performance to the limits. REDEFINED GREATNESS A redesigned internal frame gives the wearer greater safety. Seamless technology joins the lower and upper parts of the shell to give it a refined, elegant look and improved aerodynamics. The new OCTOFIT+ adjustment system optimizes the helmet's comfort and stability, while a vertical stabilizer across the nape of the neck provides ergonomic neck support and delivers enhanced balance and a customized fit. Its large rotation cap coated in a special rubber increases finger grip, and a reflective insert in the rear helps keep the helmet's wearer even safer. The internal lining is made of CoolMax® fabric which, as well as being comfortable and quick-drying, is also removable and washable. As is standard with all KASK helmets, the Protone Icon has been developed in accordance with the KASK ROTATIONAL IMPACT WG11 TEST protocol, an objective, scientific approach to measuring the helmet's performance against rotational impacts.

The most aero road helmet in the peloton now breathes better. The S-Works Evade 3 was reinvented from the inside out to cool better, making it the fastest choice for more stages. Through extensive Computational Fluid Dynamics and Win Tunnel testing, we created a rear "diffuser" that helps minimize drag and improve ventilation. The diffuser helps optimize aero performance by allowing air to release easier and improves ventilation by drawing 10% more air through the helmet at a given speed. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - Enlarged front vents help increase ventilation. - Rear Diffuser for aero and ventilation benefits. - MIPS Air Node is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - Dual-density optimized EPS foam.

The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages. With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam "bridges" from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made. When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid "cables" traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - AirCage innovation increases airflow. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - MIPS Air Node technology is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Occipital Base Adjustment optimizes comfort and compatibility with glasses. - ANGi-ready Mindset fit system for improved grip and reaction for easy on-the-go fit.

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

A minimalist carbon road cycling shoe designed to merge performance and comfort to deliver a pure riding experience—an instant classic for anyone seeking the most from every mile. Tempo Decos is a performance road shoe for riders outside of the demanding pro peloton. - PU laminate over mesh upper - Li2 BOA Fit System - R2 outsole – full carbon unidirectional, stiffness index 10 - Outsole stiffness index 5 - Weight: 228 g - Sizes: 36-48 (37 to 47 also in half sizes)

Lightweight & Aero The Kask Protone Helmet's sleek profile was designed with the aid of computational fluid dynamics software to create a shape that retrains its efficiency in the wind through all head angles. The result is a helmet that's quiet and low-drag in any position on the bike. For a highly personalized fit, Kask's Octo Fit retention system features a rubberized dial tension adjuster, plus vertical adjustability and movable rear cradles. The Coolmax lining has an antimicrobial treatment, and the chin strap is made from eco-leather that's washable along with being super soft to prevent irritation. Features - Eco-Leather Chinstrap: Chin pad with a synthetic leather chinstrap. The hypoallergenic and washable chinstrap is extremely comfortable and helps to avoid skin irritation. - 3D Dry Padding: The tridimensional 3D DRY padding utilizes a multi-layer open cell construction process: high technology for the best comfort and performance. - Coolmax Fiber: Removable and washable inner padding in Coolmax material. - Inner Frame: The innovative inner strengthening frame offers greater mechanical strength and a better compactness. In case of shock, it prevents the helmet from breaking into many pieces, allowing greater safety for every rider. - Octo Fit: Rubberized Micro Dial adjuster provides improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible. - Aero Control: Incredibly aerodynamic and top performing shell, tested in a wind tunnel and able to provide a really impressive CX rate. Any position the head will assume the outflow of the air will be perfectly in line with the helmet. - High Visibility: High visibility stickers for maximum safety even in poor visibility conditions. - MIT: MIT Technology guarantees a higher head safety, with complete polystyrene protection thanks to the polycarbonate layer that covers the shell on the top, on the base ring, and on the back. - Weight: 215g (M size)

A pair of elite performance bib shorts raced from cobbles to cols. Worn by the riders of EF Education First Pro Cycling, the Pro Team Bib Shorts are the ultimate in comfort and performance. Comfortable enough to be worn every day for training and racing, these shorts are also durable enough to withstand the chaos of the pro peloton, from the punishing cobbled roads of the Classics to the high summit finishes of the great Grand Tours. Our dual-density Pro Team chamois pad provides comfort and support with minimal bulk. The pad is size-specific for a perfectly tailored fit—no one-size-fits-all here. The main fabric is lightweight, fast-wicking with excellent compression and support. Extra-wide, direct-applied silicone leg grippers keep the shorts in place comfortably with a sleek low-profile finish. Breathable uppers provide superb stretch and support, while low-profile bonded edges barely show beneath close-fitting race jerseys. Two radio pockets are positioned on the lower back, offset to avoid discomfort against the spine. - New dual-density chamois pad for supreme comfort and support - Unique wide leg gripper with direct applied silicone for low-profile finish - Lightweight, high-wicking Lycra fabric - Shoulder straps bonded for smooth, low profile - Rapha rubber logo print on legs - Multiple panel construction for optimum fit - Bonded seams for comfort - Name label for team laundry use - Race radio pockets either side of the spine - 78% Nylon - 22% Elastane

A pair of elite performance bib shorts raced from cobbles to cols. Worn by the riders of EF Education First Pro Cycling, the Pro Team Bib Shorts are the ultimate in comfort and performance. Comfortable enough to be worn every day for training and racing, these shorts are also durable enough to withstand the chaos of the pro peloton, from the punishing cobbled roads of the Classics to the high summit finishes of the great Grand Tours. Our dual-density Pro Team chamois pad provides comfort and support with minimal bulk. The pad is size-specific for a perfectly tailored fit—no one-size-fits-all here. The main fabric is lightweight, fast-wicking with excellent compression and support. Extra-wide, direct-applied silicone leg grippers keep the shorts in place comfortably with a sleek low-profile finish. Breathable uppers provide superb stretch and support, while low-profile bonded edges barely show beneath close-fitting race jerseys. Two radio pockets are positioned on the lower back, offset to avoid discomfort against the spine. - New dual-density chamois pad for supreme comfort and support - Unique wide leg gripper with direct applied silicone for low-profile finish - Lightweight, high-wicking Lycra fabric - Shoulder straps bonded for smooth, low profile - Rapha rubber logo print on legs - Multiple panel construction for optimum fit - Bonded seams for comfort - Name label for team laundry use - Race radio pockets either side of the spine - 78% Nylon - 22% Elastane

A high-performance bib short worn in the WorldTour by CANYON//SRAM and ready for your fastest rides. It's not just the name that's changed on our elite-level race day bib shorts. We've incorporated feedback from the riders of CANYON//SRAM to improve our women's WorldTour race-winning bib shorts. Made with a lightweight mesh, the highly breathable upper section has been reshaped with more fabric across the back to provide more support around the waist. The bib straps have been slimmed down into an anatomical shape with high-stretch panels over the shoulders to reduce bulk and create a stable fit for all riders of all heights. A subtle radio pocket is stitched in just above the waist, allowing you to stay in touch with teammates. Below the waist, the short makes use of a new, high-stretch Lycra that is soft against the skin yet slightly compressive for an optimized, in-the-drops race fit. The new fabric also incorporates recycled materials, making it 20% less impactful than the fabric we used previously. Low-profile, super-wide silicone leg grippers further improve stability while distributing pressure evenly across the leg to avoid pinching. At the center of it all is our redesigned, female-specific race chamois whose dual-density constructive and quick-drying fabrics make for comfort, day after day. - Redesigned with feedback from CANYON//SRAM - Female-specific, dual-density chamois pad - Low-profile silicone leg grippers - Single radio pocket on the back - Reflective tabs for safety in low light Main: - 78% polyamide / 22% elastane Mesh: - 80% polyamide / 20% elastane Pad: - 100% polyurethane

The Switchblade MIPS is an ASTM downhill certified full-face helmet with a removable chinbar so you can easily switch to rowdy when it's time to descend. Everything about the Switchblade is optimized for the descent. That's why in addition to mandatory standards, it's also certified to ASTM-1952 DH with and without the chinbar. The chinbar is easy to remove - just push the buttons under the chinbar, rotate up, and take off—and it's just as easy to reinstall. Another boast-worthy feature on the Switchblade MIPS is the Roc Loc Air DH fit system, which has a bumper around the dial to prevent accidental adjustments if your helmet contacts your backpack or neck brace—all while keeping you cool. When the chinbar comes off, Wind Tunnel cheek pad ventilation adds even more cooling power as you start to climb. Plus, the full-cut style gives this helmet an aggressive look and provides ASTM certified coverage even when the chinbar is removed. When your ride is all about descending, your helmet should be too, and the Switchblade MIPS is the only removable chinbar helmet that is truly built for the down.

Pro-level Tri racing shoes designed to shorten transitions and optimize power transfer. Synthetic Leather Lighter, stronger and more durable than natural leathers External Heel Cup External curved heel cup suppresses foot twist and roll Quick Straps For fast triathlon transitions Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Wider Cleat Adjustment Expands range for mounting cleats - T1-Quick strap and extra-wide upper opening simplify and speed up transitions - Lightweight, rigid carbon fiber composite sole efficiently transfers power - Water-resistant microfiber synthetic leather with strategic venting - Breathable 3D mesh breathes great and dries fast - External heel cup stabilizes heel - Large heel loop is easier to grab

The Specialized Pro MTB have always been good cycling shoes. But Specialized doesn't rest on its laurels and has further developed these bike shoes. Thanks to their optimized fit, the Pro MTBs offer improved performance in mountain bike use - from XC to All Mountain. - Performance-enhancing design in the outsole and high-performance footbed thanks to BodyGeometry technology - Light and stiff, continuous FACT midsole made of carbon and stiffness level 10.0 - Lightweight D-Link closure system for secure ankle stability and perfect adjustability - Flat-cut, lightweight SL buckle for secure closure - Durable fiber-reinforced injection molded profile for reliable grip - Specially developed micromatrix upper - light, durable and supple, with welded reinforcements in stressed areas - 2-hole SPD screw pattern suitable for all common MTB pedal systems - Extra well-ventilated tongue for breathability

Helmets have long been plagued by an unspoken rule: Light weight, ventilation, aerodynamics—pick two, there's your helmet. As you can tell by now, though, we don't play by these rules—or really any for that matter. We'd rather turn standards on their head and create products that nobody ever dreamed of. And you needn't look any further than the new S-Works Evade helmet for proof of this. Straight up, it's the fastest road helmet out there. We've teamed up with MIPS researchers to introduce MIPS SL—a new, ultra-light, and supremely comfortable version of MIPS that's available exclusively on Specialized helmets. With MIPS SL, we've essentially integrated MIPS technology within the helmet padding itself. MIPS SL's minimalist "watchband" attachment system provides 10 to 15 millimeters of rotation in every direction and offers the same brain protection benefits as other versions of MIPS, while also ushering in a new level of comfort and weight savings. Beginning with the aerodynamic development, we basically lived in our Win Tunnel to create this Evade. Having our own wind tunnel allows us to develop our products with aero at the forefront of the design, rather than merely testing them there. With this, we carefully analyzed every aspect of helmet performance in the Win Tunnel, and with real world testing, to ensure that we left no stone unturned in the quest for performance. This makes for a helmet that has countless testing hours and years of development, and ultimately, this adds up to the fastest road helmet we’ve ever tested. We not only took grams out of the drag, but we did it without sacrificing safety. In fact, we switched the construction to favor our Energy Optimized Multi-Density EPS that optimizes the foam type in different places. As far as ventilation is concerned, free-flowing air through the helmet not only makes the helmet cooler than ever, but it also decreases aerodynamic drag. Going hand-in-hand with this, ventilation and aerodynamics were both optimized in the Win Tunnel together, making for the best combination of aerodynamics and ventilation out there. Now, the exterior vents and interior channels have been carefully considered to make sure that the helmet draws in the maximum amount of air through the helmet for extreme cooling. And the result? The new Evade is just as cool as a bare head with no helmet, making it the coolest aero helmet on the market today. Through this work, the Evade saves 50 seconds over 40km versus a traditional road helmet and roughly six seconds over the prior iteration of Evade. This means that it's not only as cool as a bare head, but also as fast. For road race helmets, there’s nothing that can match this performance. Last, but most certainly not least, a fast helmet is useless unless it fits correctly. With this in mind, the new S-Works Evade has all the features you'd expect from a top-level helmet, like our Mindset HairPort 2 fit system with micro-adjustments, our soft webbing that won't stretch out, and a new Gutter Action brow pad that manages sweat to keep it out of your eyes. And to top it off, we've added a new magnetic buckle to the mix that makes buckling with one hand a breeze. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - New MIPS SL is the lightest, most ventilated MIPS protection to date and is exclusively available on Specialized helmets. - Through extensive Win Tunnel development, the Evade is the fastest road helmet we've tested. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports make it the best combination of aerodynamics and ventilation. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - Patented Aramid-Reinforced Skeleton provides internal EPS support to help manage impact energy. - Ultra-light Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit. - Gutter Action brow pad design for increased comfort and sweat management. - Thin, soft, and lightweight 4X DryLite webbing won’t stretch out with sweat or water. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Magnetic buckle is simple and secure.

Helmets have long been plagued by an unspoken rule: Light weight, ventilation, aerodynamics—pick two, there's your helmet. As you can tell by now, though, Specialized doesn't play by these rules—or really any for that matter. They'd rather turn standards on their head and create products that nobody ever dreamed of. And you needn't look any further than the new S-Works Evade helmet for proof of this. Straight up, it's the fastest road helmet out there. Their new ANGi Crash Sensor gives you and your loved ones peace of mind like never before—when combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with the Specialized app and STRAVA® to provide GPS-based activity tracking. Specialized has teamed up with MIPS researchers to introduce MIPS SL—a new, ultra-light, and supremely comfortable version of MIPS that's available exclusively on Specialized helmets. With MIPS SL, they've essentially integrated MIPS technology within the helmet padding itself. MIPS SL's minimalist "watchband" attachment system provides 10 to 15 millimeters of rotation in every direction and offers the same brain protection benefits as other versions of MIPS, while also ushering in a new level of comfort and weight savings. Beginning with the aerodynamic development, they basically lived in their Win Tunnel to create this Evade. Having their own wind tunnel allows them to develop their products with aero at the forefront of the design, rather than merely testing them there. With this, Specialized carefully analyzed every aspect of helmet performance in the Win Tunnel, and with real world testing, to ensure that they left no stone unturned in the quest for performance. This makes for a helmet that has countless testing hours and years of development, and ultimately, this adds up to the fastest road helmet they've ever tested. Specialized not only took grams out of the drag, but they did it without sacrificing safety. In fact, they switched the construction to favor their Energy Optimized Multi-Density EPS that optimizes the foam type in different places. As far as ventilation is concerned, free-flowing air through the helmet not only makes the helmet cooler than ever, but it also decreases aerodynamic drag. Going hand-in-hand with this, ventilation and aerodynamics were both optimized in the Win Tunnel together, making for the best combination of aerodynamics and ventilation out there. Now, the exterior vents and interior channels have been carefully considered to make sure that the helmet draws in the maximum amount of air through the helmet for extreme cooling. And the result? The new Evade is just as cool as a bare head with no helmet, making it the coolest aero helmet on the market today. Through this work, the Evade saves 50 seconds over 40km versus a traditional road helmet and roughly six seconds over the prior iteration of Evade. This means that it's not only as cool as a bare head, but also as fast. For road race helmets, there’s nothing that can match this performance. Last, but most certainly not least, a fast helmet is useless unless it fits correctly. With this in mind, the new S-Works Evade has all the features you'd expect from a top-level helmet, like our Mindset HairPort 2 fit system with micro-adjustments, soft webbing that won't stretch out, and a new Gutter Action brow pad that manages sweat to keep it out of your eyes. And to top it off, they've added a new magnetic buckle to the mix that makes buckling with one hand a breeze. - Integrated ANGi crash sensor. - New MIPS SL is the lightest, most ventilated MIPS protection to date and is exclusively available on Specialized helmets. - Through extensive Win Tunnel development, the Evade is the fastest road helmet they've tested. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports make it the best combination of aerodynamics and ventilation. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - Patented Aramid-Reinforced Skeleton provides internal EPS support to help manage impact energy. - Ultra-light Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit. - Gutter Action brow pad design for increased comfort and sweat management. - Thin, soft, and lightweight 4X DryLite webbing won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Magnetic buckle is simple and secure.

Helmets have long been plagued by an unspoken rule: Light weight, ventilation, aerodynamics—pick two, there's your helmet. As you can tell by now, though, we don't play by these rules—or really any for that matter. We'd rather turn standards on their head and create products that nobody ever dreamed of. And you needn't look any further than the new S-Works Evade helmet for proof of this. Straight up, it's the fastest road helmet out there. Our new ANGi Crash Sensor gives you and your loved ones peace of mind like never before—when combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA to provide GPS-based activity tracking. - Integrated ANGi crash sensor. - Includes a lifetime subscription to the Specialized Ride app. - New MIPS SL is the lightest, most ventilated MIPS protection to date and is exclusively available on Specialized helmets. - Through extensive Win Tunnel development, the Evade is the fastest road helmet we've tested. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports make it the best combination of aerodynamics and ventilation. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - Patented Aramid-Reinforced Skeleton provides internal EPS support to help manage impact energy. - Ultra-light Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit. - Gutter Action brow pad design for increased comfort and sweat management. - Thin, soft, and lightweight 4X DryLite webbing won't stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Magnetic buckle is simple and secure.

Ultimate road competition shoe with supremely engineered fit and optimum power transfer. FEATURES - 360° surround wrapping upper creates a supremely engineered fit for all riders. - Heel cup with anti-twist stabilization secures optimal foot positioning for intense acceleration and high tempo cadences. - Function-specific zones and scientifically optimized upper materials maximize fit and pedaling performance. - Dual low-profile BOA Li2 dials allow quick and precise micro-adjustments. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Adjustable powerzone lace guide securely holds forefoot.

Standout Style with Bold Visibility Choose to ride, choose to be seen. The new Ethos™ Mips® Shield is a revolution in transportation, with a clear, molded eye shield that stylishly adds protection from the elements while still allowing riders to use their existing eyewear. (The Ethos Mips Shield also is available without eye shield as the Ethos Mips.) Its compact and stylish form features the added protection of Mips® Brain Protection System highlighted by integrated LED front white lights, rear red lights, and amber turn signals, all controlled via an intuitive handlebar remote. The entire system is USB-C rechargeable with an estimated run time of 10 hours in low-blink mode and 5 hours in the high-blink mode, which delivers 45 lumens front and 30 lumens rear. Helmet and remote can be fully charged in just 2 hours and 1 hour, respectively. Despite the added technology, in-mold construction keeps the weight manageable, full hardbody coverage adds durability, and a Roc Loc® Mips City fit system plus quick-dry padding ensure comfort. Whether you're a dedicated bike commuter, running the kids to school on your e-cargo bike, or simply looking for added visibility as you ride around town, the Ethos Mips Shield is a look into the future. - REFLECTIVE WEBBING — Reflective threads are strategically woven into the helmet retaining straps for an added element of visibility. - INTUITIVE REMOTE — The handlebar-mounted remote controls the front and rear lights, allowing riders to select solid or flashing modes, change brightness levels, and easily activate the turn signals. - TURN SIGNALS — With their bright amber flashes, the integrated turn signals speak the common language of traffic, broadcasting the rider's intended path to other road users. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces, while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. - ROC LOC CITY MIPS FIT SYSTEM — The Roc Loc City Mips fit system features a rubberized dial for easy adjustability and large plush pads for ultimate comfort and stability. The fit system is made of a durable flexible material for long term performance and daily lockability. The three positions of vertical adjustability, and 6cm range make this a perfect fit, for your daily use. - INTEGRATED AND RECHARGEABLE LED LIGHTS — Front and rear integrated and rechargeable LED lights: two front "be seen" white lights and two red rear lights for substantially increased visibility to drivers. HIGHLIGHTS - Built-in front (white) and rear (red) LEDs - Handlebar-activated turn signals (amber/yellow) - Micro-USB C rechargeable - Deep coverage - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Premium All-Round Bib Short Key Features: - Supremely comfortable bib shorts for complete comfort on road rides - Made with a luxurious Lycra fabric that incorporates recycled fibres - Tried and tested size-specific Classic chamois pad with multiple foam layers for optimal support - Lightweight, high-stretch mesh fabric uppers aid temperature regulation - Low-profile, silicone-backed leg grippers hold the shorts in place - Signature styling for those who refuse to choose between performance and style Details and Materials: - Recommended for use in mild to warm conditions - Single-density chamois pad for all-day comfort - Updated grippers and flatlock stitching - Rear key pocket on lower back - Printed Rapha logos on each side - Branded flag label on uppers Main: - 58% Recycled Nylon - 42% Elastane Contrast: - 73% Recycled Nylon - 27% Recycled Elastane

Featherweight gravel racing shoes. Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Heel Stabilizer Improves heel hold - Super stiff and lightweight carbon composite sole - System engineered with SPD pedals for maximum pedaling efficiency and stability - Lightweight, abrasion-resistant TPU lugs for the best balance of pedaling performance and off-the-bike capability - Surround upper pattern provides the perfect balance of holding power and absolute all-day comfort - Boa IP1 with dual micro adjustment function

The whoosh of your buddy passing you through the rock garden is basically just an invitation to chase. You'll be happy to oblige in these Smith Attack MTB sunglasses. The maximum-coverage lenses use ChromaPop™ technology to provide amplified detail and enhanced color, so you can stay focused on the trail ahead. The no-slip temples and two-position nose pad keep them in place over every baby head and wet root. When you finally catch up and cruise back to the shuttle, quickly swap between the included bright-light and low-light lenses using Smith's MAG™ lens interchange system. Product Details Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture resistant coating for easy cleaning and clear optics - Larger, maximum-coverage lens features ventilation channel for fog-free vision - 100% UV protection Fit / Integration - Medium fit, large coverage - 7x4 toric lens curvature - Two-position adjustable nose pads Frame - Lightweight, flexible and durable TR90 frame - Smith MAG™ lets you change lenses quickly - AutoLock hinges hold frames open for easy one-hand on and off What's Included - Bonus ChromaPop Low Light Amber lens - Microfiber bag with spare lens sleeve - MAG performance case

The whoosh of your buddy passing you through the rock garden is basically just an invitation to chase. You'll be happy to oblige in these Smith Attack MTB sunglasses. The maximum-coverage lenses use ChromaPop™ technology to provide amplified detail and enhanced color, so you can stay focused on the trail ahead. The no-slip temples and two-position nose pad keep them in place over every baby head and wet root. When you finally catch up and cruise back to the shuttle, quickly swap between the included bright-light and low-light lenses using Smith's MAG™ lens interchange system. Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture resistant coating for easy cleaning and clear optics - Larger, maximum-coverage lens features ventilation channel for fog-free vision - 100% UV protection Fit / Integration - Medium fit, large coverage - 7x4 toric lens curvature - Two-position adjustable nose pads Frame - Lightweight, flexible and durable TR90 frame - Smith MAG™ lets you change lenses quickly - AutoLock hinges hold frames open for easy one-hand on and off

The Eclipse Spherical is both the fastest road helmet and the coolest aero road helmet Giro has ever created, bringing our best technologies together in a light, compact form that's ideal for road and gravel racing. The sleek outer shell actively streamlines airflow to reduce drag across multiple wind angles, while 14 Wind Tunnel vents pull air through the helmet to provide incredible cooling power that rivals our most aggressively vented road helmets. Inside, the ball-and-socket design of Spherical Technology is powered by the MIPS brain protection system, which allows the helmet's outer EPS foam liner to rotate around the inner foam liner during a crash to help redirect impact forces away from the brain. Progressive Layering of both the inner and outer liners help to offer more comprehensive protection, too. The patented Roc Loc 5 Air system enhances stability and fit, and plush antimicrobial Ionic+ padding helps absorb sweat and moisture while providing durable antimicrobial performance.

A lightweight in-mold design with built-in front and rear LED lights and remote handlebar-activated turn signals is the perfect accessory for the daily commute through the urban jungle. STANDOUT STYLE WITH BOLD VISIBILITY Choose to ride, choose to be seen. The Ethos™ Mips® is a revolution in transportation, with a compact and stylish form featuring the added protection of Mips® Brain Protection System highlighted by integrated LED front white lights, rear red lights, and amber turn signals, all controlled via an intuitive handlebar remote. The entire system is USB-C rechargeable with an estimated run time of 10 hours in low-blink mode and 5 hours in the high-blink mode, which delivers 45 lumens front and 30 lumens rear. Helmet and remote can be fully charged in just 2 hours and 1 hour, respectively. The Ethos Mips features a TPU soft rubber waterproof brim. (The Ethos Mips also is available with a clear, molded eye shield as the Ethos Mips Shield). Despite the added technology, in-mold construction keeps the weight manageable, full hardbody coverage adds durability, and a Roc Loc® City Mips fit system plus quick-dry padding ensure comfort. Whether you're a dedicated bike commuter, running the kids to school on your e-cargo bike, or simply looking for added visibility as you ride around town, the Ethos Mips is a look into the future. Highlights: - Built-in front (white) and rear (red) LEDs - Handlebar-activated turn signals (amber/yellow) - Micro-USB C rechargeable - Deep coverage - Quick-dry padding

Giro design, and high-performance innovation for core road cyclists, gravel enthusiasts, and adventure riders. Advanced Performance for the Adventurous The heart of the Helios's extraordinary design and performance is Spherical Technology, which utilizes a ball-and-socket design powered by MIPS, the market-leading brain protection system that can help to reduce rotational forces. Spherical Technology allows the helmet's outer liner to rotate around the inner liner during a crash, and also allows Progressive Layering of the inner and outer liners to provide more comprehensive protection and performance. In addition to advanced head protection, the Helios's 15 Wind Tunnel vents provide exceptional cooling power that's enhanced by our patented Roc Loc 5 Air fit system and plush, antimicrobial XT2 padding for exceptional sweat absorption. It's the ideal match for your road and gravel adventures. Specs: - Impact Management: Spherical Technology, Powered By Mips - Construction: Independent, in-mold liners with spherical ball-and-socket design, Polycarbonate Shell, Hardbody Lower Shell - Ventilation:15 wind tunnel vents with internal channeling - Fit System: Roc Loc 5 Air - Weight: 270 (Size Medium CPSC, CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078 - Highlights: Nanobead EPS Foam, Coolfit Antimicrobial Padding, Slimline Webbing, Four-piece shell w/lower hardbody

Giro design, and high-performance innovation for core road cyclists, gravel enthusiasts, and adventure riders. Advanced Performance for the Adventurous The heart of the Helios's extraordinary design and performance is Spherical Technology, which utilizes a ball-and-socket design powered by MIPS, the market-leading brain protection system that can help to reduce rotational forces. Spherical Technology allows the helmet's outer liner to rotate around the inner liner during a crash, and also allows Progressive Layering of the inner and outer liners to provide more comprehensive protection and performance. In addition to advanced head protection, the Helios's 15 Wind Tunnel vents provide exceptional cooling power that's enhanced by our patented Roc Loc 5 Air fit system and plush, antimicrobial XT2 padding for exceptional sweat absorption. It's the ideal match for your road and gravel adventures. Specs: - Impact Management: Spherical Technology, Powered By Mips - Construction: Independent, in-mold liners with spherical ball-and-socket design, Polycarbonate Shell, Hardbody Lower Shell - Ventilation:15 wind tunnel vents with internal channeling - Fit System: Roc Loc 5 Air - Weight: 270 (Size Medium CPSC, CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078 - Highlights: Nanobead EPS Foam, Coolfit Antimicrobial Padding, Slimline Webbing, Four-piece shell w/lower hardbody

New cycling bib shorts for riding and training in hot and humid conditions, with a light, breathable fabric, and a thin mesh upper section to keep you cool. The Flyweight Bib Shorts are designed for riding in hot and humid conditions. The shorts are made of an extremely lightweight, soft four-way stretch fabric—the lightest we've used in our bib shorts—that has been treated with coldblack which reduces the build-up of heat. The upper section has a breathable and lightweight construction, with a thin mesh that stretches to fit over your shoulders. The chamois pad is the same perforated one used in the Pro Team Lightweight Bib Shorts. Featuring colored uppers to pair with the Flyweight Jerseys, allowing you to look—and stay—cool as you take flight in the heat. The bibs are available in two lengths, regular and short, with a difference between leg lengths of approximately 1 inch. The short option is for shorter riders or those who prefer a higher hem on the thigh. - Constructed from a lightweight performance fabric - Lightweight mesh straps - Multiple panel construction for optimum fit - Bonded seams for comfort - Name label for team laundry Main: - 80% Nylon - 20% Elastane Contrast: - 95% Polyester - 5% Elastane

New cycling bib shorts for riding and training in hot and humid conditions, with a light, breathable fabric, and a thin mesh upper section to keep you cool. The Flyweight Bib Shorts are designed for riding in hot and humid conditions. The shorts are made of an extremely lightweight, soft four-way stretch fabric—the lightest we've used in our bib shorts—that has been treated with coldblack which reduces the build-up of heat. The upper section has a breathable and lightweight construction, with a thin mesh that stretches to fit over your shoulders. The chamois pad is the same perforated one used in the Pro Team Lightweight Bib Shorts. Featuring colored uppers to pair with the Flyweight Jerseys, allowing you to look—and stay—cool as you take flight in the heat. The bibs are available in two lengths, regular and short, with a difference between leg lengths of approximately 1 inch. The short option is for shorter riders or those who prefer a higher hem on the thigh. - Constructed from a lightweight performance fabric - Lightweight mesh straps - Multiple panel construction for optimum fit - Bonded seams for comfort - Name label for team laundry Main: - 80% Nylon - 20% Elastane Contrast: - 95% Polyester - 5% Elastane

Make sure you're all in on race day when you buckle up in the Smith Ignite race helmet. Its aerodynamic shape, energy-absorbing Koroyd impact protection, and MIPS liner system give you the confidence and advantage you'll need to attack with speed and catch the breakaway. Fully integrated eyewear storage allows you to pull on your shades fumble-free, so you never miss an opening. PROTECTION: Zonal Koroyd coverage for lightweight, energy-absorbing and ventilated impact protection, MIPS Brain Protection System reduces rotational forces caused by angled impacts to the head. FIT / INTEGRATION: VaporFit dial adjustment system offers 270-degree fit adjustment with the turn of a dial, Low-profile Y-strap divider provides a secure fit to reduce wind noise and aerodynamic drag, Designed for ultimate integration with Smith performance eyewear for maximum comfort, venting and storage convenience, AirEvac ventilation system integrates with Smith goggles and eyewear for fog-free lens FEATURES: Eight fixed vents for consistent airflow, Ionic+ antimicrobial lining offers sweat-activated odor control, Lightweight, low-bulk single-layer webbing. WEIGHT: (Size M, MIPS) 11oz / 310g CERTIFICATION: CPSC

The Trace is the pinnacle helmet in Smith's performance road collection. The Trace features Koroyd, which fully surrounds the helmet providing exceptional protection and works with the internal air channels and open intake and exhaust ports produce maximum ventilation. Storage and ventilation of eyewear is crucial on those long rides, the Trace’s AirEvac system relieves hot air that builds up on your eyewear to prevent fogging. Eyewear storage is made easy by channels on the side of the helmet that hold your eyewear in place for those grueling climbs. - Lightweight Aerocore in-mold construction - Complete ventilated protection featuring Koroyd - Integrated skeletal structure - VaporFit adjustable fit system - 18 optimized vents - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Ultimate eyewear integration - Light mount compatible - MIPS system in all colors - Weight: (Size M, MIPS) 10oz / 280 grams - Certification: CPSC Sizing - Small: 51 – 55cm - Medium: 55 – 59cm – Large: 59 – 62cm

Inspired by the legendary European sport of randonneuring, the new Audax shoe has been developed specifically for long rides spent chasing far horizons. Featuring proven Body Geometry fit with a spacious toe box, Boa® closure, and a FACT carbon outsole, the Audax combines comfort, adjustability and connection in a carefully crafted and timeless shoe. Be audacious and go big--ride Audax. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT Powerline™ carbon/composite sole for light, stiff power transfer: Stiffness Index 10.0. - Overstrap with Boa® S2-Snap dial for easy adjustment, backed by the Boa® Lifetime Guarantee. - Supple Micromatrix synthetic leather with laser perforated venting and reflective elements for visibility. - Classic low profile heel reduces Achilles pressure for comfortable ankle motion. - Three-bolt cleat pattern fits all major road pedals. - Standard Fit last for support and all-day comfort. - Approximate weight: 265g (1/2 pair, size 42)

Inspired by the legendary European sport of randonneuring, the new Audax shoe has been developed specifically for long rides spent chasing far horizons. Featuring proven Body Geometry fit with a spacious toe box, Boa® closure, and a FACT carbon outsole, the Audax combines comfort, adjustability and connection in a carefully crafted and timeless shoe. Be audacious and go big--ride Audax. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT Powerline™ carbon/composite sole for light, stiff power transfer: Stiffness Index 10.0. - Overstrap with Boa® S2-Snap dial for easy adjustment, backed by the Boa® Lifetime Guarantee. - Supple Micromatrix synthetic leather with laser perforated venting and reflective elements for visibility. - Classic low profile heel reduces Achilles pressure for comfortable ankle motion. - Three-bolt cleat pattern fits all major road pedals. - Standard Fit last for support and all-day comfort. - Approximate weight: 265g (1/2 pair, size 42)

The profile of Valegro's polycarbonate shell has been tested and refined by KASK’s engineers in conjunction with a wind-tunnel to get the best results in terms of thermo-cooling performance. The Valegro offers advanced ventilation and an impressive weight of just 180g (size small). This new design offers maximum cooling through 37 ventilation holes with new breathable and quick-dry padding. The 5mm layer of fast-wicking thermoformed tri-dimensional padding is antistatic, bacteriostatic, heat regulating and moisture transferring using Resistex Carbon. Alongside this cutting-edge technology, the chin pad with eco-leather strap contributes to a helmet that’s comfortable to wear, all day.

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

Maximum cooling, minimum weight Developed in cooperation with Team SKY, Valegro is designed to offer the best comfort ventilation when climbing or riding in hot conditions. The profile of VALEGRO's polycarbonate shell has been tested and refined by KASK’s engineers in conjunction with a wind-tunnel to get the best results in terms of thermo-cooling performance. The VALEGRO offers advanced ventilation and an impressive weight of just 180g (size small). This new design offers maximum cooling through 37 ventilation holes with new breathable and quick-dry padding. The 5mm layer of fast-wicking thermoformed tri-dimensional padding is antistatic, bacteriostatic, heat regulating and moisture transferring using Resistex Carbon. Alongside this cutting edge technology, the chin pad with eco-leather strap contributes to a helmet that’s comfortable to wear, all day.

The Synthe is the pinnacle of road helmet design, combining the performance gains of aero efficiency and light weight with great cooling power to enhance rider comfort and efficiency. The compact form slips through the air with ease across multiple yaw and head angles, and offers greater cooling power than the Aeon. Key features include the Roc Loc Air fit system with 2-way fit tuning and Aero Mesh Panels with a dedicated port for securely docking sunglasses as you ride. Synthe MIPS models are equipped with the Multi-Directional Impact Protection System. MIPS can provide more protection in certain impacts, and this added “under the hood” technology does not compromise fit, ventilation or style.

ROAD COMPETITION LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Ultra-rigid hollow carbon midsole efficiently vents air and drains water. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - SHIMANO DYNALAST promotes smoother pedaling and more efficient power transfer.

ROAD COMPETITION LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Ultra-rigid hollow carbon midsole efficiently vents air and drains water. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - SHIMANO DYNALAST promotes smoother pedaling and more efficient power transfer.

KOO OPEN glasses are designed to get the best contact with the face, giving the clearest possible sight. Unique features include an innovative folding pivot to store and fold with ease, and a soft rubber nose-pad with two adjustable positions for a customized fit. A smaller nose bridge is also standard. For ease of use, OPEN glasses feature easily-removable, interchangeable lenses for year-round optimum vision when cycling. The design also includes an ‘Airflow Active System’ which means the lenses can be tilted at three different angles to adjust the position of the glasses on the face so that every rider can maintain the clearest lens possible in all weather conditions. The flexible temples improve the fit without interfering with comfort. - KOO OPEN glasses come with an additional clear lens and a hard case.

XC COMPETITION-LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Ultra-rigid, lightweight carbon fiber reinforced midsole. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon—power transfer, comfort, light weight, style—in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pavé-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you’re flying up a run-up on the ‘cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we’ve given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

Crafted with long ride comfort at the top of the list, we paired our all new Levitate PRO Chamois with luxurious Italian PRO Transfer fabric to create a bib short that you will choose for your most important rides. Just seven carefully engineered panels are used to minimize seaming for a perfect contour to your body. Wide, laser-cut bib straps provide a barely-there, yet supportive fit. And raw edge hems create a smooth transition from short to skin for a sleek, high-performance look and feel, with a printed silicone gripper to hold it securely in place even during hard efforts. FEATURES - Pedal to Zero™: Going by bike 16mi / 26km offsets the climate impact of this garment - Luxurious Italian PRO Transfer fabric balances compression for ultimate comfort - New Men's Levitate™ PRO Chamois pad with triple-density design delivers unmatched support - Seven-panel design minimizes seams and optimizes body-contouring fit - Laser-cut raw edge leg hem construction for seamless transition to skin - BioViz® reflective elements for low-light visibility - 10.5" inseam

The Shimano SH-RC7 shoe is a true competition road shoe offering better power transfer, endurance and overall performance. The RC7 shoe features an ultra-rigid lightweight carbon fiber composite sole for precise, effective power transfer. Supple high-density synthetic leather upper with perforated venting provides premium support and breathability. The Shimano Dynalast curved anatomical last creates a natural shoe-to-foot interface. Built based on feedback from pro riders, Shimano Dynalast helps reduce energy loss on long rides, letting you keep more in the tank for that final sprint to the line. The adjustable Powerzone wire guide holds your forefoot securely, with dual Boa L6 dials that allow quick, micro tension adjustments to eliminate pressure points. 245grams(size42). Features: - Ultra-rigid, lightweight carbon fiber composite sole. - SHIMANO DYNALAST helps to reduce braking loss while pedaling. - Supple yet durable synthetic leather with perforated venting. - Dual independent Boa L6 dials allow quick, micro tension adjustments. - Adjustable Powerzone wire guide hold forefoot securely. - Light and supple perforated synthetic leather upper for superior fit and cooling.

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

Performance Training Bib Short Key Features: - For building fitness on back-to-back days in mild to warm conditions - Based on the original iteration of Pro Team Bib Shorts – proven in the WorldTour peloton - Made with a partly recycled fabric that offers optimal compression during tough efforts - Size-specific Pro Team Training chamois pad optimised for long training rides - Elasticated, silicone-backed leg grippers ensure the shorts stay securely in place - Breathable bib straps made with mesh fabric keep you cool when you’re working hard Details: - Recommended for use in mild to warm conditions - RAPHA logo in shoulder panel and on both legs - Multiple panel construction for optimum fit - Name label for team laundry use Materials: - 74% Recycled Nylon - 26% Elastane