Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Zipp CeramicSpeed Freehub Body and Bearing Kit: 177 SRAM/Shimano Cassette Hub Body
$363.00
- Kits include Freehub body with CeramicSpeed bearings pre-installed for easy installation onto the wheel - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Zipp CeramicSpeed Freehub Upgrade Kit ZIPP 177
$363.00
- Lowest resistance hybrid ceramic (ceramic balls and steel cages) available - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Kits include Freehub body with CeramicSpeed
PowerTap 15mm Aluminum Freehub Body Kit (11-Speed)
$99.99 - $299.99
PowerTap’s 15mm Aluminum Freehub Body Kit is constructed of stiff, light aluminum and steel, and rolls on fine bearings. This is the correct replacement freehub for your PowerTap 11-speed wheel.
Zipp Conversion Kit 11-speed to Track 188 Black
$205.00
Zipp Speed Weaponry Rear Axle Conversion Kits - Converts a road disc into a track disc rear - Fits black 2013 188 V8 disc hubs only - Fits Zipp 900 and Super-9 Discs
Zipp Conversion Kit 10 – 11-speed 188 SRAM
$190.00
Zipp Speed Weaponry Rear Axle Conversion Kit - Not to be used on 188 V6 or earlier rear hubs - Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed
Zipp Conversion Kit Super 9 Disc 10-speed to Track for 188 Hub Silver
$176.00
Zipp Speed Weaponry Rear Axle Conversion Kit - Converts a road disc into a track disc rear - Disc must have silver, NOT black flanges - Fits 188 disc hub only - cannot be used on 900 or Sub-9 discs - Fits Zipp Super-9
Zipp Connect Wheel Bag
$163.00
Each bag holds one wheel (up to 700c with 35mm cyclocross tire) for transport. It also connects to a second Zipp Connect wheel bag (sold separately) to form a double wheel bag. - Sturdy, water-resistant EVA construction with distinctive molded Zipp graphics. - Integrated carry handle and detachable shoulder strap. - Removable internal pocket for storing quick-release skewers and axle end caps. - Padding holds wheel in place.
Muc-Off No Puncture Hassle Tubeless Sealant
$153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Zipp 11-speed Freehub Kit for 177 Hub
$140.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$136.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp Cognition Freehub Kit
$116.30 - $133.00
Freehub bodies for Zipp Cognition hubs.
Mavic ID360 Freehub Body
$70.00 - $90.00
Get rolling again with a replacement freehub body for your Mavic wheels. - For Mavic ID360 hubs
Robert Axle Project Front Lightning Bolt-On Thru Axle
$42.00 - $83.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
SRAM Maxle Stealth Rear
$31.00 - $82.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
All-City Go-Devil Freehub Body
$80.00
- 11 Speed Freehub Body for Shimano and Sram Cassettes - XD Driver for SRAM Cassettes - 11 Speed Freehub has 28 points of engagement - XD Driver has 56 points of engagement - Fits Go-Devil Hubs
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
WTB TCS Rim Tape
$16.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Zipp 11-speed Freehub Body for 30/60 Wheels
$74.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
SRAM XD Driver Freehub Body for 746 Rear Hub
$72.00
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap
Mavic FTS-L 10-speed Freehub Body
$70.00
Get rolling again with a replacement 10-speed freehub body for Mavic wheels.
Campagnolo Shamal Ultra Label Kit
$69.90
- Decals for replacement rims
Robert Axle Project BOB Trailer Thru Axle
$62.00 - $69.00
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
Zipp Single Wheel Bag
$68.00
- Holds one wheel securely for transport (up to 700c with 35mm CX tire installed). - Connects to second Zipp Connect wheel bag to transform into a double wheel bag. - Sturdy water-resistant EVA construction. - Includes removable axle/QR pocket.
Robert Axle Project Kid Trailer Thru Axle
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Kid Trailer Thru Axle for Surly MDS/Gnot-Boost
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike. and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - This axle is specifically designed to fit the 142/148 hub standard Surly MDS or Gnot Boost bikes. - The derailleur end of our axle is internally threaded and will use the bolt from your stock Surly axle. The disc brake side of our axle has an engineered mount for your trailer hitch. That mount has been permanently attached to the axle. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. The threads are M10x1 (metric). - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
SRAM XD Driver Freehub Body for 900 Rear Hub
$65.00
Replacement freehub body for Sram 900 series hubs
Odyssey Antigram 9-Tooth Driver
$64.99
Replacement 9T driver for Odyssey Antigram cassette hubs
Zipp Tubeless Kit
$58.00
- Kit includes tape, 2 valves & 1 valve core wrench
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Robert Axle Project Trainer Thru Axle for Surly MDS/Gnot-Boost
$54.00
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
FSA Rim Strips
$49.99
Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.
Ritchey WCS Freehub Body for Apex and Zeta 9 speed Shimano
$49.95
Authentic replacement freehub body for Ritchey V1 Apex and Zeta road wheels. - 9-speed
Salsa Deadbolt Thru-Axle
$49.00
The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications
Robert Axle Project Rear Lightning Bolt-On Thru Axle
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
Crank Brothers Front Endcaps Kit
$39.99
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
Delta Knoxnuts Security Skewers
$39.99
If wheel theft could be a problem, then these high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super-tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key. KnoxNuts can be installed on existing skewers or combined with the KnoxNut Skewer, a unique and unobtrusive blind-head cromoly skewer. The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com. Set Includes: - Front blind-head skewer with KnoxNut - Rear blind-head skewer with KnoxNut
Manitou Hexlock Axle
$39.99
Replacement axles for Manitou forks
Wheels Manufacturing Inc. Axle-12
$39.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-34
$39.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-10 Axle
$38.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 126mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 137mm - 1 axle per bag
Robert Axle Project Drive Thru Dummy Hub Value Meal
$35.00
The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. Installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport. - Value Meal includes 1.0, 1.5, and 1.75mm thread pitch dummy axles. - All Drive Thru dummy axles are 12mm in diameter. - Dummy axles are precision machined from 7075 aluminum and knurled for easy grip. - Pulleys are machined from durable Delrin. - Oil and solvent resistant O-rings - Lead-in threads designed for quick insertion into the frame - Simple, one-handed installation (no tools required)
Surly Ultra New Hub Axle Kit
$34.15
Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular
Wheels Manufacturing Inc. Axle-01
$34.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 126mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 137mm - 1 axle per bag
Surly Thru Axle
$30.00 - $33.00
Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.
Sunlite Locking Skewers with Key
$31.99
• 5-sided key locking skewer set • Chromoly axles • 6061 anodized aluminum • Includes seat and F+R wheel skewers • 95g (set)
All-City Go-Devil Rear Thru-Axle Conversion Kit
$30.00
Rear Thru Axle conversion kit for Go-Devil Hubs - Converts QR to 142x12mm thru (axle not included)
Surly Thru Axle
$30.00
Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy
Delta Hublox Anti Theft Bolt-On Skewers
$29.99
- Lock and unlock with special key - Lightweight aluminum key is easy to carry - Anti-rust CrMo axle, stainless steel springs
Shimano Deore XT HB-M8000 Quick Release Skewer
$29.49
Shimano XT M8000 quick release skewer.
Zipp 77/177 Disc Conversion Caps
$17.10 - $28.00
Zipp Speed Weaponry Hub Conversion Caps
SRAM X0 Hub Conversion Caps
$18.00 - $27.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Stan's NoTubes Rim Tape
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Problem Solvers Stainless Downtube Shift Cable Adjusters
$24.99
The Problem Solvers Downtube Shift Cable Adjusters replace your existing shift adjusters, or let you add integrated shifters to your current down tube shifter-equipped road bike. Made from durable plastic and stainless steel, these adjusters are built to last for countless miles on your road steed.
SRAM Rise 40 Conversion Caps
$23.00
SRAM's Rise 40 conversion caps are the ticket for converting your Rise 40 wheels to a different axle type. You can easily change axle standards with the SRAM Rise 40 conversion cap tool (sold separately).
Stan's NoTubes Alloy Tubeless Valve Stems
$23.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Shimano Alfine S700 Small Parts Kit
$22.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Stan's NoTubes Downhill Rim Strip
$22.50
Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Neo Front Hub End Caps
$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Origin8 RD/CX/GX/MT-1110 Elite Skewer
$20.99
- Elite Series skewers for road, cyclocross, gravel, and MTB applications - AL6061 alloy lever with CrMo axle - Available for 100mm, 130mm, and 135mm OLD spacing - Spacing / Axle: QR - Wt: 53g
All-City Go-Devil Front Hub End Caps
$20.00
Hub End Caps for Go-Devil Hubs. Caps for quick release, 12mm, and 15mm available.
Page 1 of 2 Next page