Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$25.00
• M4 threaded pedal cages mounting holes
• Four windows in pedal body large enough to fit double toe straps
• Polished Body
• Concave footbed
• Single-sided design
$25.00
Forged alloy platform pedals with a hardened chromoly spindle.
- Molded pins
- Size: 9/16-inch
$44.99
These extremely durable pedals are constructed of a nylon composite thermoplastic body and feature eight removable steel M3 pins per side for superior grip.
- One sealed bearing is paired with a long-lasting DU sleeve in each pedal for an impressively smooth interface
- Chromoly steel spindle for strength
- Spindle size: 9/16-inch
$29.97 - $59.99
$59.99
Up to 50% Off
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years
$59.99
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip.
- Premium brass cleats with shims included
- Q-factor: 57mm
- Release angle: 15° / 20°
- Forged 435 Chromoly steel spindle
- 300 series stainless steel spring
- 5-year warranty
- 331g per pair
$59.99
The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap.
- Thin, concave profile - 13.5mm to 15.5mm pedal body height
- One-piece replaceable traction pins, 10 per pedal
- Upgraded, fully serviceable IGUS bearings and seal system
- Forged SCM 435 Chromoly Steel spindle
- Optimal size-specific surface area
- Platform dimensions: 100 x 100mm (Small)
- Platform dimensions: 114 x 114mm (Large)
- Small recommended for shoe sizes: 3-10 (US M) // 37-43.5 (EU)
$59.99
The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap.
- Thin, concave profile - 13.5mm to 15.5mm pedal body height
- One-piece replaceable traction pins, 10 per pedal
- Upgraded, fully serviceable IGUS bearings and seal system
- Forged SCM 435 Chromoly Steel spindle
- Optimal size-specific surface area
- Platform dimensions: 114 x 114mm
- Large recommended for shoe sizes: 10-15 (US M) // 43.5-49 (EU)
$60.00
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 355g per pair
- Warranty: 5 years
$99.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel.
Specs:
Spindle material: Forged SCM 435 chromoly steel
Body material: Cast stainless steel
Wing material: 17-4PH stainless
Spring material: 300 series stainless steel
Release angle: 15° / 20°
Q-factor: 52mm
Inner bearing type: Igus LL-glide bearing
Outer bearing type: Enduro cartridge bearing
Cleat: Premium brass cleats with shims included
Weight: 280g per pair
Warranty: 5 years
$165.00
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$15.00
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)
$16.00
Dimension Mountain Basic Pedals.
- Molded nylon 1-piece, caged-type pedal with reflectors
- Accepts toe clips
- Hang tag packaging
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 330g
$26.00
Dimension Mountain Compe Pedals.
- Forged aluminum body
- Accepts toe clips
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 335g
$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 520g
$54.95 - $59.95
An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions.
- High-impact nylon body built to take abuse
- Smooth-running sealed bearing and DU bushing
- Electroplated chromoly spindle
- Electroplated stainless steel replaceable pins for added grip with shoes or boots
- Nylon body doesn't suck heat out of your feet like alloy pedals do
- Height: 14mm
- Width: 105mm
- 9/16"
$1,099.99
Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 326g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 320g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$55.00
The X-TRACK is LOOK's entry level off-road pedal, but does not mean technology is left aside. The aluminum body and Chromoly+, double-sealed axles are robust and ensure total fluidity thru the pedal stroke. Tension can be quickly and easily adjusted from 6 thru 14.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Aluminum
- Spindle: Chromoly+
- Platform area: 350mm²
- Platform width: 57mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 200g
- Weight (pair + cleats): 450g
- Float angle: 6°
- Release angle: 13°
$64.00
Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly
- Platform Material: Composite
- Platform area: 400mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.8mm (11.5 + 6.3mm)
- Weight (pedal): 140g
- Weight (pair + cleats): 350g
$85.00
The KEO CLASSIC 3 PLUS maintains the fast clip in / clip out with easy tension adjustment, and features stainless steel construction for optimized pedal stiffness and transfer of power, and increased protection against wear.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly
- Platform Material: Stainless Steel
- Platform area: 400mm²
- Platform width: 60mm
- Q Factor: 53mm
- Stack height + cleats: 17.8mm (11.5 + 6.3mm)
- Weight (pedal): 140g
- Weight (pair + cleats): 350g
$88.00
The GEO TREKKING GRIP pedals are ideal for commuting. Featuring a one-sided SPD-compatible mechanism, with a flat surface elastomer grip on the other, safe for riding in any conditions.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Composite / Elastomer bi-injection
- Traction: Elastomer bi-injection
- Spindle: Chromoly+
- Platform width: 86mm
- Weight (pedal): 228g
- Weight (pair + cleats): 511g
$94.00
The X-TRACK EN-RAGE is a sturdy pedal to accompany you on your favorite trail ride with varying terrain. The forged aluminum body is designed to resist extreme conditions and potential abuse from trail riding. The large contact area is perfect for riders looking for a comfortable width that offers security but also a surface contact-to-weight ratio which remains best in class for trail pedals.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Aluminum
- Spindle: Chromoly+
- Platform area: 545mm²
- Platform width: 63mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 210g
- Weight (pair + cleats): 470g
- Float angle: 6°
- Release angle: 13°
$115.00
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 130g
- Weight (pair + cleats): 328g
$137.00
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Carbon
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 60mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 125g
- Weight (pair + cleats): 312g
$174.00
KEO BLADE CARBON pedals feature a Chromoly axle and stainless steel bearings for extreme reliability. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals are ready for the ride.
- New leading edge profiling for increased aero dynamics and reduced drag
- Improved sealed spindle design to resist water intrusion with dual sealed steel bearings and 1 needle bearing
- Better retention lever durability compared to previous design
- Easier clip-in rotation due to improved weight balance
- 3-part high grade stainless steel contact points for higher impact resistance and durability
- 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure
- Easy clip in/out with composite blade retention 8 (installed)
- Carbon Body, Chromoly + Spindle
- KEO cleats included
$252.00
KEO BLADE CARBON CERAMIC pedals take the BLADE series to the next level, featuring a Chromoly axle paired with ceramic bearings for even more reliability and performance. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to race with confidence.
- New leading edge profiling for increased aero dynamics and reduced drag
- Improved sealed spindle design to resist water intrusion with dual sealed ceramic bearings and 1 needle bearing
- Better retention lever durability compared to previous design
- Easier clip-in rotation due to improved weight balance
- 3-part high grade stainless steel contact points for higher impact resistance and durability
- 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure
- Easy clip in/out with composite blade retention 12 (installed)
- Carbon Body, Chromoly + Spindle
- KEO cleats included
$270.00
The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Carbon
- Spindle: Titanium
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 145g
- Weight (pair + cleats): 340g
- Float angle: 6°
- Release angle: 13°
$34.99
Sylvan Road Pedals are a classic Campagnolo copy.
- Classic Campy copy with CroMoly spindle
- Body dimensions: 101 x 68mm
- Highly polished light alloy body and cage
- Accepts toe clips
$51.30
$85.50
40% Off
Exceptional build quality for reliable performance. MSW dual-sided clipless Flash II Pedals incorporate a simple release mechanism with impressive foot support. The lightweight design reduces fatigue to extend your riding time. And isn’t that what it’s all about?
- Chromoly 9/16” spindle, bushing & bearing configuration
- SPD-compatible, 2-bolt cleats included, 4° float, 14.6° angle of release
- Dual-sided clipless, aluminum pedal body
- Adjustable spring tension with tension indicator
- Black
- Made in Taiwan
$52.25
Built to handle the rigors of riding off-road, the MSW Thump composite pedals with replaceable steel pins provide solid traction when the trail gets hairy. The concave shape combined with tall pins provide the perfect balance of comfort and traction for a range of applications meant to expand your horizon.
- Tough nylon composite body with adjustable, replaceable steel pins
- Platform Size = 118 x 99 x 19 mm
- Chromoly steel, 9/16” spindle, sealed cartridge bearings and nylon bushings
- Pin height: 3 mm out of the box. Remove the 2 mm washer under the pin head to convert to 5 mm pin height.
- Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort
- Composite pedal body
- Black
- Made in Taiwan
$59.99
Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.
$19.99
One of the most successful and popular pedals, and for good reason.
The original Twisted PC is extremely simple, lightweight, inexpensive, and famously durable plastic-bodied design. Often duplicated but never replicated.
Features:
- High-strength nylon composite
- 16 pins per side
- Traditional looseball bearings
- Chromoly spindle
Specs:
- Width: 98mm
- Length: 89mm
$24.99
The Twisted Pro pedal features a larger body shape, slimmer height and more concave.
- Loose-ball bearing
$63.99
- Pedal body made of ruggedly durable engineering-grade thermoplastic
- LSL sleeve bushing and sealed bearing
- 9/16" CNC machined Chromoly spindle
- 10 M3-8mm replaceable pins per side
- Platform size: 113mm x 105mm
- 350g per pair
$81.49
Origin-8's Ultim8 MTB Single Clipless Pedals feature adjustable SPD-compatible bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also sometimes with regular shoes. With sealed bearings and chromoly axles, the Ultim8's are durable and practical all-around pedals.
$92.99
- Double-sided clipless design
- Forged 6061 aluminum body
- DU bushings
- SPD compatible (6° float)
- Chromoly 9/16-inch spindle
- 275g pair
$150.99
- All-road race-inspired dual-sided clipless pedal
- Lightweight yet durable carbon fiber/nylon composite platform for added stability
- CNC-machined chromoly spindle
- 3 LSL sleeve bushings
- Shimano SPD style cleat with 6° float
- Fully adjustable tension
- Platform size: 86mm x 78mm
- 295g per pair
- Size: 9/16"
- Cleat Type: SPD
- Material: Carbon/Nylon
$49.99
Houston, we have... no problems here. The all-new Range Pedal is the perfect blend of comfort, grip, affordability and colorful pops for the best no-compromise flat pedal.
- Glass fiber-reinforced nylon composite
- 390g per pair
- 1 inboard bushing, 1x cartridge bearing, 1x roller bearing
- 22 steel pins and nuts per pedal
- Platform Size of 108mm W x 115mm L
- Sold In Pairs
$99.00
Ever heard of the Goldilocks Zone? We're not talking about a family of bears here. The Goldilocks Zone is a precise zone within the universe to sustain life. Well, technically, it's the right range of temperatures for water to remain liquid. Whatever. The new Loam Pedal is that zone. That perfect balance of the best elements to breathe new life into all of your rides.
- Forged and CNC'd 6061 Aluminum
- Sealed Cartridge and Roller Bearings
- 445 Grams Per Pair
- 22 Replaceable Pins Per Pedal
- Platform Size of 105mm W x 115mm L
- Sold In Pairs
$34.99 - $39.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance.
- Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
- Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts
- 9/16"
$55.00
Chester returns to the party with more grip, a second size option and a better ride feel, all with the same tough composite build at a price that any rider can get behind. With fully serviceable internals, eight colors and a Lifetime Warranty inclusive of crashes, you’ll be glad to have Chester along for the ride. Chester pedals provide the feel you want with the grip you need, at an exceptional value.
- Chromoly Steel axle
- Nylon Composite body
- 11 pins per side, including 9 metal and 2 co-molded plastic
- 16mm platform height
- Available in two size options
- Large: 115 x 110mm
$59.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g
$129.99
The Best Of Both Metals
The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up.
Surefooted As A Mule
You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need.
Your True Colors Shining Through
Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you.
Get Up Stand Up
Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):16.9
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 101 x 100
- Weight: 375g
$129.99
- Follows the evolution of modern trail bikes and all-mountain rigs, providing you a more sure-footed, durable pedal to match your single-track endeavors.
- Thin and lightweight
- Bottom loaded hex-head threaded pins (20x/pedal)
- Body: 15.5mm thick
- Platform: 110mm x 115mm
- Chromoly steel axle
- Bearing/bushing
- Internals are fully serviceable and replaceable
- 440g
$179.99
Low And Lean
Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on.
Round And Round We Go
Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable.
Ride Don't Slide
Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck.
Look Good Ride Good
Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like.
Pedal Envy
More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):14.5
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 114 x 101
- Weight: 355g
$199.99
The Arclight PRO Clipless Pedals are the ultimate bike safety upgrade. Arclight Pedals amplify your biological motion making you up to 57% more visible than standard bike lights. And you are not just more visible - you're recognizable as a cyclist. Powerful LEDs and long lasting rechargeable batteries ensure you will stand out and stay safe even on your longest ride.
- The PRO Clipless pedal is SPD-compatible, with multiple configurations so that you stay safer on your long road rides whether you prefer dual-sided clipless, single-sided or you can remove both for a flat pedal option
- Machined Aluminum body, High Strength Chromoly Axle, Low-friction Sealed Bearings
- 97mm x 95mm
- Light run time: Eco Flash: 36+hrs, Flash: 11+hrs, Steady: 3+hrs
- The Light Modules have a built-in USB plug for easy charging on any standard USB charger or with the included 4-place charging hub
$55.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
- 380 grams (pair)
$65.00
Grippy flat pedal for off-road riding
The ideal flat pedal, Shimano’s PD-GR400 delivers a perfectly balanced blend of low weight, grip, stability, and durability. Outfitted with nine removable pins per side, these lightweight resin composite body pedals keep your feet securely in place, while also permitting critical foot repositioning so you can maintain balance and control no what the trail throws at you.
Features
- The Shimano PD-GR400 are grippy flat pedals with a trail riding platform that’s stable and secure underfoot.
- Perfect Balance: Nine removable pins per side deliver balanced combination of grip and mobility.
- Ample Clearance: Low profile pedal body lessens chance of pedal strikes on rocks, roots, and other trail obstacles.
- Low Weight: Resin composite body keeps weight low at just 394 grams.
- Robust Performance: Chrome-molly spindle with 6mm hex wrench mount is strong and durable.
Ample Obstacle Clearance
Thanks to a low profile pedal body design (16 mm at center), these pedals are less likely to get hung up on rocks, roots, or other trail obstacles. This reduces the chance of pedal strikes, allowing you to stay focused and in command no matter how technical the terrain gets.
Plenty of Platform
Measuring a healthy 101 x 96 mm and built with a grippy contact surface area optimized for trail riding, Shimano’s GR-400 pedals provide a stable platform that’s secure underfoot. Confidence is further enhanced by nine removable pins per side, which assist in delivering the ideal balance of grip and mobility. The end result is a pedal that keeps your foot secure and engaged, but also allows you to reposition on the fly or stick a foot out if things get a little too rowdy.
$65.00
- Easy step in, easy step out
- Lighter spring tension optimized for beginner riders
- Larger entry target for easier engagement
- Cascaded features from top-tier systems
- Extra-wide platform transfers pedaling power efficiently
- Durable stainless steel body plate reduces flex and pedal body wear
- Sealed mechanism
- Single Sided Binding
- Cartridge axle
- Cleat retention adjuster
- Average weight: 320g
- Road clearance: 30
- Cleat included: SM-SH11
- Optional cleat: SM-SH10, SM-SH12
- Pedal Type: Road
$70.00
With a wide contact area, the PD-ME700 pedals let riders focus on the trail ahead. Designed to work seamlessly with SHIMANO AM series shoes, the SPD trail pedals deliver enhanced stability over rough terrain.
FEATURES
- Wide, dual-sided platform improves pedal-to-shoe stability and power transfer
- Integrated cage increases control when not clipped in and protects binding mechanism from impacts
- Robust retention claws provide smooth engagement and release
- Rider adjustable entry and release tension for individual customization
- Chrome-moly spindle and low-maintenance sealed bearing cartridge axle
$80.00
These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals.
- Weight: 533 grams (pair)
$85.00
PD-EH500 pedals
FEATURE
- One side SPD, the other side flat
- Light action binding makes frequent stepping-in & out easier
- Better grip on flat side for wet condition
BENEFIT
- Convenient road touring pedal
- Optimized for urban riding
- Multi-condition
- Best match with CT or MT shoes
$95.00
Get rad without getting broke. This Multi-Purpose Flat Pedal from Shimano has a wide platform and adjustable pin height to dial in the perfect amount of grip for your preference and riding conditions.
- 3 different pin height settings to match different type of riding
- 9 pins per platform
- Highest setting is+5 mm higher than PD-MX80's pins
- Weight: 533g
$100.00
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings.
- 352 grams (pair)
$115.00
The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident.
CLEAN APPEARANCE
- The PD-ES600 features a clean appearance body for use on lightweight road touring bikes.
EASY RIDER ADJUSTMENT
- Easy-to-adjust entry and release tension settings.
SYSTEM ENGINEERED TO WORK TOGETHER
- SHIMANO RT footwear is designed to match the PD-ES600.
$120.00
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
- 310 grams (pair)
$140.00
- Large pedal platform
- Lower platform height for pedaling stability
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-moly spindle with 8 mm hex wrench mount
- Sealed mechanism
- SM-SH51 Cleat included
- 1.0 mm cleat spacer included
- Binding: Dual sided
- Cartridge axle
- Cleat retention adjuster
- Average weight: 342g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
Page 1 of 2
Next page