Cables

High-octane cable systems for today's brake and drivetrain systems. - Features RapidWire compressionless technology and Jet-Lube housing - Rapidwire brake housing boosts braking performance on the road, linear-pull, and mechanical disc brake applications - Sets include cable and housing for both front and rear brake and derailleur applications - Universal kit contains heads for Shimano/SRAM Road or Mountain levers - For Campagnolo brakes, you need to supply your own cables - Made in Japan

Hydraulic hose with banjo fitting for TRP brakes.

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths. Compact design makes new electric components smaller and lighter EP8 EP800 Series

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths. - Compact design makes new electric components smaller and lighter - EP8 EP800 Series

Shimano SM-BH90 disc brake hose and hose kits offer solutions for your brake hose and connection requirements. OEM hose Kit for Deore BR-M615 disc brakes

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Shimano Dura-Ace OT-SP41 Housing & Polymer Cable Derailleur Sets - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed

Shimano SM-BH90 disc brake hose and hose kits offer solutions for your brake hose and connection requirements. OEM hose kit for Dura-Ace BR-R9170 disc brakes

Shimano SM-PCE02 link cable for e-tube and Di2 systems.

Shimano E-Tube wires and connectors - Frame grommets for E-tube internal-wiring compatible frames are sold separately, see Shimano Frame Grommet Kit Electronic Shifter Extra Parts - Ultegra Di2 wires utilize Shimano's e-tube technology; e-tube is a two-prong system and is NOT cross compatible with Dura-Ace 7970 Di2 wiring - All e-tube wires may be used for internal or external applications

SRAM's SlickWire Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules and frame protectors. - Weight: 99 grams (pair)

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

- Brake casing has internal lining and external plastic coating - Length: 30m

Slick compressionless gear cable/housing kits offer smooth, fast, accurate, and reliable shifting Kits include: - 4mm pre-lubed, Kevlar-lined, compressionless gear housing - 1.1mm stainless steel die-pulled and polished slick gear cable(s) with SRAM/Shimano compatible head(s) for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protector(s) - Cable tip(s)

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

A great replacement for OE cables and a perfect way to bring style to a bike, the 1x Sport Shift kits make it easy. They come with a weld-cut single-ended Slick Stainless cable for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This kit is designed for use on bikes with a 1x drivetrain with a rear derailleur or internally geared hub. - Single-ended shift cable is compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cable combines with a Slick-Lube housing liner to offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for a rear derailleur or internally geared hub - OEM-level cables and housing with high-quality small parts

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm